4
CAUTION
To prevent property damage or injury from an unstable installation, extend the Tubes [04] beyond the outside edges of both Monitor Brackets [05] and tighten the Allen Bolts on Vise Assemblies [06] and [A] of the Arm Assembly [02].
Do not overtighten Vise Assemblies [06] and [A]. Turn the Allen Bolt until resistance is felt.Then tighten the Bolt about 1½ turns, or until it is slightly above the surface of the Vice Assembly.The Tubes [04] will not move from side to side if the Vise Assemblies are correctly tightened.
[06] [A]
[05]
[02]
[04]
[06] [A] [06]
5
3/16 in
≥ 305 mm | 63.5 mm | |
≥ 12 in. | ||
2.5 in | ||
|
4x | 4x |