![[03]](/images/new-backgrounds/38235/3823515x1.webp)
10
![[10]](/images/new-backgrounds/38235/3823515xi2.webp){kind=small}
CAUTION
To avoid injury, do not place your hands or fingers between moveable parts.
[03]
[16]
2x 
11
Leave some slack in the cables to prevent excess tension on the connectors. Do not run cables through any pinch points.
Wire Tie Clips [10] can be pressed into holes on the top and bottom of the Arm Assembly [02] or sides of the Preventor [03]. Wire Ties [09] may be threaded through the Wire Tie Clips or holes in the Monitor Brackets [05] to secure the cables.
[10]
[05]
[02]
[03]
CSAV, Inc. and its affiliated corporations and subsidiaries (collectively,“CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.The information contained in this document is subject to change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
