Sanyo 263, AVL-261, 323 Memorizing the Channels, Selecting the Tuning Band, Auto Channel Search

Memorizing the Channels

This unit can automatically find all channels available through antenna or cable inputs, and store them in memory.

Selecting the Tuning Band
Before your TV can memorize the available channels, you must specify the type of signal source that is connected
to the unit. (i.e., an antenna or cable system)
1	Press MENU to display the menu main page.
				Tuning Band		Air
2	Press 5or 6 repeatedly to select Setup menu.		Video	DTV Signal
			Audio	Auto Ch Search
3	Press OK or4 to access the submenu.			Add On Ch Search
			Setup	Manual Ch Set
4	Press 5or 6 to select Tuning Band item.			Channel Labels
5	Press OK or 4 to select the Tuning Band.		Feature	To Move OK To Select Exit To Exit
	Air, Cable, Cable HRC, Cable IRC and Cable Auto can be selected.
	If using antenna, select Air;
	If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area’s cable
	system. Normally please select Cable Auto. (For further band information, contact your cable service
	provider.)
Auto Channel Search			Video	Tuning Band		Air
				DTV Signal
				Auto Ch Search
1	Navigate to the Setup sub-menu and highlight Auto Ch Search.		Audio
				Add On Ch Search
	Press OK or4to begin the auto channel search.		Setup	Manual Ch Set
2				Channel Labels
	The unit will automatically search for all available TV/DTV (if			To Move OK To Select Exit To Exit
			Feature
	using antenna), CATV/CADTV (if using cable) program.
	Note: if you want to stop the auto-search, press EXIT button.
	Digital (CADTV) cable systems may cause several	Autoprogram Menu				Found
	unviewable channels to be memorized.	Channel 12
Add On Channel Search		Channels Found			7	3
After initial auto channel search, you can make use of Add On		Progress (%)
Channel Search option to search for new programs and add them to
1	Navigate to the Setup sub-menu and highlight Add On Ch
			Video	Tuning Band		Air
				DTV Signal
2	Press OK or4to begin the add on channel search.			Auto Ch Search
			Audio	Add On Ch Search
				Manual Ch Set
	The unit will automatically search for new programs and add them		Setup
	to the program list.			Channel Labels
	Note: If you want to stop the search, press EXIT button.		Feature	To Move OK To Select Exit To Exit

Manual Channel Set

After setting channels into memory, you can add or delete channels
from the default channel list as follows:
1	Navigate to the Setup sub-menu and highlight Manual Ch Set.
2	Press OK or 4to open Manual Channel Set Menu sub-menu.
	Use 5 or 6 button to select a channel, then press the OK button
3 to add or delete the channel.
4	Press EXIT button to exit.
	Now when you use CH+/- buttons to cycle among the channels,

Video	Tuning Band	Air
	DTV Signal
Audio	Auto Ch Search
	Add On Ch Search

	Manual Ch Set
Setup	Channel Labels
Feature	To Move OK To Select Exit To Exit

the deleted channels can not be selected.

15