UHF/VHF/CATV
75Ω
| AUDIO VIDEO INPUT | AUDIO | |
| Cable / Antenna Input | OUTPUT | ||
| |||
|
| ||
| Terminal (75 ohms) |
|
| |
|
| L | |
| R AUDIO L VIDEO |
| |
| (MONO) | R | |
|
| ||
| Audio/Video Input Jacks | Audio Output Jacks (Fixed) | ||
Connect external video | |||
Connect external audio | |||
equipment here (see page 9). | |||
equipment here (see page 9). | |||
To familiarize yourself with this Remote Control, see page 6.
INSTALLING BATTERIES (2 AA not included)1.Remove the battery cover by pressing the tab and tilting the cover upward. Insert
batteries. Make sure you match + / 
signs on the batteries with marks inside the remote control.
2. Replace battery cover. The remote control is ready!
Notes:
– Do not mix old batteries with new ones or mix different types of batteries together.
– Remove the batteries if the remote control will not be used for a month or more. Weak batteries may leak and cause damage. (Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed of properly in compliance with all applicable laws. For detailed information, contact your local County Solid Waste Authority.
QuickTips
■Make sure all cable connectors are fully seated on jacks.
See page 9 before connecting external video equipment.
■Cables are not supplied for connect- ing your external equipment.
■A solid Blue screen with the word Video displayed means that the Video mode is selected, but no signal is being detected at the Video jack. Check connection, and turn on external equipment.
■Be sure batteries are installed correctly.
■Point the remote control toward the TV. Objects between the remote control and the TV may cause misoperation of the remote control function.
5