Samsung HT-C6900W AUX : Connecting an External Analog Component, Red White, Vcr Aux, English

Connecting Audio from External Components

02 Connections

DIGITAL	HDMI IN
AUDIO IN
OPTICAL

LAN

HDMI OUT

COMPONENT OUT

VIDEO OUT

Optical Cable (not supplied)

Set-Top Box

OPTICAL

Red White

Audio Cable (not supplied)

If the external analog component has only one Audio Out, connect either left or right.

VCR

AUX

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

1.Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component.

2.Press the FUNCTION button to select D.IN input.

• The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM

✎NOTE

To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV.

This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.

This system supports only DTS and Dolby Digital audio, MPEG audio (bit stream) is not supported.

AUX : Connecting an External Analog Component

Analog signal components such as a VCR.

1.Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.

•Be sure to match connector colors.

2.Press the FUNCTION button to select AUX input.

• The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM

✎NOTE

You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.

English 27