Setup
Resolution according to the output mode
•Blu-ray Disc playback
Output | HDMI / connected | HDMI / not connected | |||
Setup | HDMI Mode | Component/VIDEO Mode | Component Mode | VIDEO Mode | |
| |||||
Auto | Optimal Resolution | 480i | - | - | |
1080p, Movie Frame (24Fs) off | 1080p@60F | 480i | - | - | |
1080p/1080i, | 1080p@24F | 480i | - | - | |
Movie Frame (24Fs) on | |||||
|
|
|
| ||
1080i, Movie Frame (24Fs) off | 1080i | 480i | 1080i | 480i | |
720p | 720p | 480i | 720p | 480i | |
480p | 480p | 480i | 480p | 480i | |
480i | - | - | 480i | 480i | |
• DVD playback |
|
|
|
| |
| Output | HDMI / connected | HDMI / not connected | ||
Setup |
|
|
|
| |
| HDMI Mode | Component/VIDEO Mode | Component Mode | VIDEO Mode | |
|
| ||||
Auto |
| Optimal Resolution | 480i | - | - |
1080p |
| 1080p@60F | 480i | - | - |
1080i |
| 1080i | 480i | 480p | 480i |
720p |
| 720p | 480i | 480p | 480i |
480p |
| 480p | 480i | 480p | 480i |
480i |
| - | - | 480i | 480i |
✎NOTE
If the connected TV does not support Movie Frame or the selected resolution, the message “If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection?” will be displayed.
If you select Yes and the resolution is not supported, the TV's screen will be blank. Please wait. After 15 seconds, the resolution reverts to the previous value automatically.
If the screen is blank, press and hold the STOP () button on the front of the product for more than 5 seconds (no disc inserted). All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.
When the factory default settings are restored, all user BD data is deleted.
The
If both HDMI and Component jacks are connected and you are currently viewing component output, there may be a difference between the resolution listed in the table and actual resolution depending on your TV.
If the HDMI Auto Detection feature does not work, you can't select the 1080p resolution or Movie Frame (24Fs).
