Sanyo C2432 Wiring Instructions for Inter-unitConnections, How to remove the cover plate, b

3-8. Wiring Instructions for Inter-unit Connections

(1)Insert the inter-unit wiring (according to local codes) into the through-the-wall PVC pipe. Run the wiring toward the indoor side allowing approx. 10 inch to extend from the wall face. (Fig. 19)

(2)Route the inter-unit wiring from the back of the indoor unit and pull it toward the front for connection. (Fig. 20a, 20b)

(3)Connect the inter-unit wiring to the corresponding terminals on the terminal plate (Fig. 20a, 20b) while referring to the wiring diagram.

(4)Be sure to secure the wiring with the provided clamp.

How to remove the cover plate

To access the terminal plate inside the indoor unit, follow these steps.

(1)Using a Phillips screwdriver, take out the screw on the cover plate. (Fig. 20a, 20b)

(2)Remove the cover plate.

Rear	Wall
panel

Plastic cover

Wiring

10 in.

Fig. 19

Terminal plate

Cover plate

Fig. 20a

Inter-unit

control line

wiring

Earth plate

Lock nut

Top of conduit connector

Fig. 20b

9