4. Refrigerant Tubing
4-1. Indoor Unit Tubing
■
NOTE
For
1.Make a
2.Set the rear panel at its original position where it was installed with screws.
3.Cut the wide tube at a point
4.Remove the 1/2" flare nut from the optional tube connection (C), place it on the cut wide tube, and then flare the wide tube. (Fig. 30b)
5.Connect the optional tube connection (C) to the wide tube.
6.Connect the 3/4" tube to the connected optional tube connection.
7.Connect the 3/8" tube to the narrow tube.
8.Cover the narrow and wide tubes with insulation material.
■Rear-right tubing
9.Make a
10.Connect the 3/4" tube to the wide tube.
11.Connect the 3/8" tube to the narrow tube.
12.Cover the narrow and wide tubes with insulation material.
4-2. Outdoor Unit Tubing
1.Connect a wide tube (3/4") to the wide tube valve. (Fig. 31a)
2.Connect the tube assy, which was packed in the indoor unit carton, to the narrow tube valve.
3.Before attaching the tube assy to the mounting valve, wrap the supplied packing A (3/4" ⋅
2. Mount the rear panel |
|
|
|
| 1. Cut hole |
B' | B | in wall |
A' | A |
|
Rear View | Wide tube | |
3. Cut |
|
4. Flare
5. Connect
Optional tube connection (C) 1/2" (Optional part)
Fig. 30a
3. Cut wide tube | 4. Flare wide tube |
5. Connect tube | 7. Connect |
assy | narrow tube |
| 3/8" |
Optional tube connection (C) 1/2" (Optional part)
6. Connect | Narrow |
tube 3/8" | |
wide tube |
|
3/4" |
|
Fig. 30b
Narrow tube valve
Wide tube valve
Mounting valve |
Packing B |
Clamp |
Packing A
Tube assy | Narrow tube (3/8") |
|
Wide tube (3/4")
Fig. 31a
13