Sanyo CP21KS2K, CA21YS2S, CP21XS2S, CP21SF1 Setting of the OSD Language, Connecting Other Equipment

14

1 Press the MENU button for MAIN menu display.

PICTURE

AUDIO

PRESET

LANGUAGE

2 Select “LANGUAGE “ by pressing the programme UP or DOWN button.

PICTURE

AUDIO

PRESET

LANGUAG

3 Press the VOLUME + or - button for Language menu display.

❒Connecting To the RearAV1 Input Jacks

Connecting to a Monophonic Video Recorder (AV1)

Setting of the OSD Language

ENGLISH

PyCCNN

FRANCAIS

PORTUGUES

Select “ENGLISH”, “ ”, “ ”,

“PyCCNN ”, “FRANÇAIS”, “PORTUGUES” by pressing the Programme UP or DOWN button. To return to the normal TV mode, press the MENU button.

4 Press the MENU button to return to normal TV display.

Connecting Other Equipment

You may connect the audio and video output terminals of the DVD player or VIDEO recorder to the input terminals of the TV set to enjoy the DVD and VIDEO programs.

	INPUT	MONITOR OUT
	AV1/DVD
	R	R
To Audio Input-R (AV1)	(MONO)
	L	L
To Audio Input-L (AV1)
		V
To Video Input (AV1)		I
	VIDEO	D
		E
		O

■To watch video input p i c t u r e , select AV1 position by p r e s s i n g the TV/AV Selector.

AV1

■When a monophonic video recorder is connected to this product, connect the audio output terminal of the video recorder to the L(left) audio input terminal of the TV set.

■To make sure the colour system of the TV set is consistent with the signal of your video recorder, if necessary, select a matching system. The colour system set in AV mode can be stored automatically.

Video/DVD Player

■When the audio signal from the VCR is stereo, be sure to connect the right and left channels to the respective right and left AUDIO IN terminals. Then select “STEREO” channel of the audio channel in the TV set with the remote control

AB button.Each time the AB button is pressed, the AV Stereo mode is changed as follow,

■When the stereo signal is inputted from the right and left audio input terminals, each time the SURROUND button is pressed (or selection of On-screen Menu), surround mode is changed as follows; “ SURROUND ON” and “SURROUND OFF”.

SURROUND ON

SURROUND OFF

STEREO

MONO

Note: The effect of surround is not obtained although the switching of surround is displayed in this monaural connection.