CAR CASSETTE ADAPTER (FOR
HANDLING COMPACT DISCS
BEFORE USE
Check the cassette tape insert slot of your car stereo. If necessary, change the direction of the cord on the cassette shaped pack of the adapter.
There may be some car stereo types with which this car cassette adapter will not work properly.
To change the cord direction
Gently pull the cord out of the slot on the back as shown.
Change the cord exit location (back |
or either side of the pack). Push the |
USING IN A CAR
Plug the cord into LINE OUT jack.
Insert the pack into the tape slot of the car stereo.
Car Stereo
LINE OUT
This unit is designed to play compact discs bearing the identification logo (below). Discs that do not carry this logo may not conform to the CD standards and may not play properly.
COMPACT
DIGITAL AUDIO
Dirty. scratched or warped discs may cause skipping or noise. Pay attention to the following: Handle the disc only by the edges. To keep the disc clean, do not touch the surface of the disc.
Do not apply paper or write anything on either side of a compact disc. Sharp writing instruments, or the inks used in some
CLEANING DISCS
Fingerprints should be wiped from the surface of the disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a cloth should remove most particles. Wipe in a straight motion from the inside to the outside of the disc.
YES 
NO 
cord back into the slot. |
or
Car Stereo
Discs should be returned to their cases after use to avoid serious scratches that could cause the laser pickup to skip.
Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Prolonged exposure to high temperatures can warp a disc.
Never use chemicals such as record cleaning sprays,
The unit will not play a disc that has been inserted upside down or discs that do not conform to the Compact Disc standard. Also, the unit might not play discs that are scratched, soiled or carry fingerprints.
3"
LINE OUT
6 | 7 |
