Sanyo CLT-5810 instruction manual Directory, Storing phone numbers and names

UP015DH(CLT5810) ENG OM 3/9/05 10:36 AM Page 19

DIRECTORY

Storing phone numbers and names

Memory Dialing allows you to dial a number by pressing just a few keys.

Your cordless phone stores up to 10 names/numbers in the handset.

Note:

In memory dialing operation, you must press a key within 30 seconds or the phone will return to standby mode. If you return the handset to the base, the phone will return to standby mode also.

1	Press the MEM key in standby mode.				Select Memory
				01
	¨Select Memory¨ is displayed.
				02 Alison
2	Press the	VOL/RING or	VOL/RING key, or enter a number
	(0 - 9) to select the memory location where you would like to
	store the number.
3				01:(Empty)
	Press the MEM or SELECT key.			Press Select
				to edit
4
	Press the MEM or SELECT key again.				Store Name
	¨Store Name¨ appears and a cursor
	flashes indicating that the display is
	ready for the name to be entered.
	If the Edit screen appears, the selected
	memory location is already stored. Then				Edit Memory01
	you must either edit the entry in this				Delete Memory01
					Go Back
	location, delete the entry in this location,
	or select ¨Go	Back¨ to choose another location.
5 To enter a name (up to 13 characters), use the number keys.
	• See the "Steps for entering names and special characters."
	(See page E21).
	• Use the #/	and /TONE/	keys to move the cursor to the
	desired location.
	• Use the DELETE/CH key to delete characters as needed.
	• Press and hold the DELETE/CH key to delete all the characters.
	• If a name is not required, go to step 6.

E19