Sanyo CLT-5810 instruction manual E20

UP015DH(CLT5810) ENG OM 3/9/05 10:37 AM Page 20

DIRECTORY

6 Press the MEM or SELECT key. ¨Store

Number¨ is displayed. The cursor flashes	Store Number
indicating that the display is ready for the
number to be entered.

Note:

You have 30 seconds after pressing the MEM or SELECT key to enter the number you wish to store. Otherwise, an error tone will sound and the phone will return to standby mode.

7 Use the number keys to enter the phone	Store Number
number. The phone number cannot	9057609944
exceed 20 digits.

Use the REDIAL/PAUSE key to enter a pause in the dialing sequence.

The display shows a ¨P¨. Each pause counts as one digit and represents a two second delay of time between the digits.

Use the DELETE/CH key to delete digits as needed.

Notes:

•The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.

•The pause key counts as one digit. Pressing the REDIAL/PAUSE key more than once increases the length of a pause between numbers.

8 Press the MEM or SELECT key. You will hear a confirmation tone, and the following screen appears. Memory storage is complete.

For example, if you store a name and

number into memory location number 01, Memory01 Stored the display shows ¨Memory01 Stored¨.

After about 2 seconds, the following	01	SANYO
	02	Alison
screen is displayed.	03	MOM AND DAD

Repeat steps 2 - 8 to store more numbers.

9 Press the END key to return to standby mode.

E20