Sanyo CLT-5810 instruction manual Editing a stored name and/or phone number, Vol/Ring

UP015DH(CLT5810) ENG OM 3/9/05 10:37 AM Page 25

DIRECTORY

Editing a stored name and/or phone number

1	Press the MEM key in standby mode,				Select Memory
	¨Select Memory¨ is displayed.				01 SANYO
2					02 Alison
	Press the	VOL/RING or		VOL/RING
	key, or enter a number (0 - 9) to select the				01:SANYO
	memory location you would like to edit,				9057609944
	and press the MEM or SELECT key.
3	Press the MEM or SELECT key a second time.
	The following screen appears with the				Edit Memory01
	memory location number that you have
					Delete Memory01
	selected in the display.				Go Back
4	Press the	VOL/RING or		VOL/RING key to select ¨Edit
	MemoryXX¨, then press the MEM or SELECT key. The following
	screen appears. The cursor flashes,
	indicating that the display is ready for				Store Name
					SANYO
	the name to be edited. When a name
	has not been stored, the cursor appears
	at the beginning of the second line.
5	Use the	/TONE/	, #/	, DELETE/CH, or any number key to edit
	the name. (See page E21.) To edit only the phone number, skip
	this step.
6	Press the MEM or SELECT key.				Store Number
					9057609944
	The following screen appears.
	The cursor flashes indicating that the display is ready for the
	number to be edited.
7	Use the	/TONE/	, #/	, REDIAL/PAUSE, DELETE/CH, or any

number key to edit the phone number. The phone number cannot exceed 20 digits. (See page E20.)

If you don´t want to change the phone number, skip this step.

E25