05-424 KS0971-1271 12/13/05 1:27 PM Page 8

3-4. Remove the Grille to Install the Indoor Unit

Basically, these models can be installed and wired without removing the grille. If access to any internal part is need- ed, follow the steps as given below.

Air intake grille

Grille

CAUTION

Be sure to wear work gloves

during installation to avoid being

cut by the sharp aluminum finsFig. 16a of the heat exchanger.

How to remove the grille

(1)Grasp both ends of the air intake grille, and remove it by opening towards the front and pulling towards you. (Fig. 16a)

(2)Remove the 2 screws. (Fig. 16b)

(3)Remove the screw on the right side cover plate and open the cover. (Fig. 17a)

(4)Take out the thermistor from the grille. (Fig. 17b)

(5)Pull the lower part of the grille toward you to remove. (Fig. 18a)

(6)Use a standard screwdriver to push on the tabs to remove the grille.

How to replace the grille

(1)Reinstall the grille into the lower part while aligning its tabs on the upper part. (Fig. 18b) Insert the tabs in the slots and push the lower part of the grille back into position.

(2)Make sure that the grille and frame are firmly fitted together by engaging the tabs.

(3)Attach the thermistor on the grille. (Fig. 17a)

(4)Close the cover and replace the screw. (Fig. 17a)

(5)Affix the grille with the 2 previously removed screws. (Fig. 16b)

(6)Install the air intake grille.

(a)Allow the edge of the air intake grille to slide into the top of the indoor unit, and then insert it all the way inside. (Fig. 19a)

(b)Press the bottom right and left corners of the air intake grille to attach it to the indoor unit. (Fig. 19b)

NOTE

Attach so that the round pins at the top right and left cor- ners of the air intake grille are inserted into the grooves at the top right and left of the indoor unit.

Fig. 19b

Screw cover

Fig. 16b

Cover

Thermistor

 

Thermistor

Fig. 17a

Fig. 17b

Tab

*

 

*

Grille

 

Frame

Tab

Fig. 18a

*

*

Fig. 18b

Groove

Pin

8

Fig. 19a

 

Page 8
Image 8
Sanyo Cool/Dry installation instructions Remove the Grille to Install the Indoor Unit, How to replace the grille

Cool/Dry specifications

The Sanyo Cool/Dry air conditioning unit is a versatile and efficient solution designed to provide optimal indoor comfort across varying climate conditions. Known for its advanced technologies and features, the Sanyo Cool/Dry offers an ideal balance between performance and energy efficiency, making it a popular choice among consumers looking for reliable cooling and dehumidifying capabilities.

One of the standout features of the Sanyo Cool/Dry is its multi-function capability. This unit is designed to operate in two modes: cool and dry, allowing users to effortlessly switch between air conditioning and dehumidification based on their needs. The cooling function ensures that rooms are kept at comfortable temperatures even during the hottest days, while the dry mode effectively reduces humidity levels, promoting a healthier indoor environment.

Energy efficiency is a hallmark of this model, as it includes advanced technologies that minimize energy consumption without sacrificing performance. The Sanyo Cool/Dry is equipped with a high-efficiency compressor that adapts its power according to the cooling demand. This inverter technology not only ensures a quieter operation but also significantly reduces electricity bills, making it an eco-friendly choice for environmentally-conscious consumers.

This air conditioning unit also comes with an intelligent control system that allows for easy operation and programming. Users can adjust their desired temperature settings with a remote control, which enhances convenience. Some models may even feature smart home integration capabilities, enabling users to monitor and control their air conditioning units through smartphone applications.

Another important characteristic of the Sanyo Cool/Dry is its air purification features. Many models include advanced filters designed to capture allergens, dust, and other airborne particles, helping to improve indoor air quality. This is particularly beneficial for those with allergies or respiratory issues, as it creates a cleaner and healthier living space.

Quiet operation is another highlight of the Sanyo Cool/Dry, making it suitable for residential environments where noise levels need to be kept to a minimum. This is ideal for bedrooms, offices, or any space where tranquility is prized.

In summary, the Sanyo Cool/Dry air conditioning unit combines efficiency, versatility, and user-friendly features, making it a standout option for those seeking effective climate control solutions. With its dual-mode functionality, energy-efficient technology, smart operation, and air purification capabilities, it satisfies a wide range of consumer needs while enhancing overall comfort in living and working spaces.