Sanyo DP19640 manual CH Channel + / / Cursor, Battery Precautions

1.POWER Button - Used to turn the power on/off to the LCD TV.

Remote control

1

2

3 4

5

6 7 8 9

10

11

12

13

14

15

16

17

6.MENU Button - Use to display the On-Screen menu function.

7.RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions. To use this function, select “Picture” or “Audio” in the menu screen, then press this button.

8.INPUT SELECT Button - Use to change the external input.

9.SCREEN SIZE Button - Used to change the picture size.

10.RECALL Button - This button allows you to go back to the previous channel selected by just pressing the RECALL button. Press this button again to return to the channel you were watching.

11.MUTE Button - To turn off the sound, press this button once. The LCD TV will be silenced and the symbol “Mute” will appear on the screen. The muting feature can be released by pressing the MUTE button again or one of the VOL (VOLUME) + or – buttons.

		12.VOL (VOLUME) + / – / CURSOR			/ Buttons
2.Direct Channel Selection Buttons (0-9) - Allows			- Used to operate the menu functions of the LCD
			TV. Press the	button to increase, or the button
direct access to any channel of the LCD TV.			to decrease the sound level.
3.– Button -This button is the “–” button used		13.ENTER Button - Use to enter or select
when selecting digital channels. Also can display			information for On-Screen operations.
the current channel number when viewing the		14.EXIT Button - Press to remove setup menu.
program.
		15.CCD Button - Used to display the Closed Caption
4.SLEEP Button - To set the LCD TV to turn off
			menu screen.
after a preset amount of time, use the SLEEP
		16.DISPLAY Button - When you press this button,
button on the remote control.
5.CH (CHANNEL) + / – / CURSOR	/		the current information will be displayed on a
			screen. To remove the display from the screen,
Buttons - Used to operate the menu functions of
			press this button again.
the LCD TV, and to change the channels of the
		17.AUDIO Button - Change sound track language.
LCD TV.
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES		Use two “AAA” size batteries. The batteries may last
1. Open the battery compartment cover.		approximately one year depending on how much the
		remote control is used. For best performance, it is
		recommended that batteries should be replaced on a
		yearly basis, or when the remote operation becomes
		erratic. Do not mix old and new batteries or different
		types.
		BATTERY PRECAUTIONS
		These precautions should be followed when using
		batteries in this device:
2. Install two “AAA” batteries (not supplied).		•	Use only the size and type of batteries specified.
		•	Be sure to follow the correct polarity when
			installing the batteries as indicated in the battery
			compartment. Reversed batteries may cause
		•	damage to the device.
			Do not mix different types of batteries together (e.g.
			Alkaline and Carbon-zinc) or old batteries with fresh
		•	ones.
			If the device is not to be used for a long period of
			time, remove the batteries to prevent damage or
3. Replace the battery compartment cover.		•	injury from possible battery leakage.
			Do not try to recharge batteries not intended to be
			recharged; they can overheat and rupture. (Follow
			battery manufacturer’s directions.)

12