Press the INPUT SELECT on your Remote Control to step through signal inputs to select PC.
Press the MENU to display the TV’s PC Setup Menu. Select Auto Adjustment.
Insert one end of a Stereo Mini-Audio cable into the PC Audio Out jack and the other end into the TV PC/HDMI AUDIO Input jack. (Stereo Mini- Audio Cable not supplied.)

Connections to other equipment

To connect the TV to a PC (Personal Computer)

NOTE: Before connecting any cables, disconnect the AC Power Cords of both the TV and Personal Computer from the AC outlets.

1 Connect an RGB cable from the monitor output (a) on your PC to the RGB connector on the TV and tighten the screws. (Monitor Cable not supplied.)

NOTE:

If Computer has only DVI Output (b), a DVI to RGB converter will be required (converter not included).

2

HINT:

Volume can be adjusted both from the PC and the TV VOL +/–.

3

4

NOTE:

Power on the TV and any other peripheral equipment before powering on the computer.

(a)(b)

RGB

DVI JACK

Rear of the unit

VGA cable (not supplied)

Audio cord (not supplied)

ENGLISH

NOTE:

• Save and close all documents, in case computer might need to be restarted.

• Before connecting your computer to your TV, please refer to the following chart to set to a compatible resolution.

• A Refresh Rate value of 60 Hz on your computer is recommended for your TV.

RESOLUTION

ASPECT RATIO

REFRESH RATE

HORIZONTAL

VERTICAL

 

 

(Hz)

FREQUENCY

FREQUENCY (Hz)

 

 

 

(kHz)

 

640 x 480

4:3

60

31.47

59.94

72

37.86

72.81

 

 

75

37.50

75.00

720 x 400

18:10

70

31.47

70.00

 

 

56

35.16

56.25

800 x 600

4:3

60

37.88

60.32

72

48.08

72.19

 

 

 

 

75

46.88

75.00

1024 x 768

4:3

60

48.36

60.00

1280 x 768

15:9

60

47.78

59.87

1280 x 720

16:9

60

45.00

60.00

1360 x 768

16:9

60

47.71

60.00

17

Page 17
Image 17
Sanyo DP19640 manual To connect the TV to a PC Personal Computer, Rgb, Aspect Ratio, Vertical, KHz