Remote Control Operation, Point Towards TV

REMOTE CONTROL OPERATION

➀

➁

➀Input Key—Press to select the program source to watch: Analog Channels, Digital Channels, Video 1, Video 2, or Video 3.

➂Number Keys—Press two keys to select a channel. Example: Press 0 then 6 to select channel 6. (See #13.)

Note: Numerical direct channel selection works for either Analog or Digital channels in memory but not both at the same time.

➂		➃Channel Scanning (CH ▲▼) Keys—Press to scan
➂		➃Channel Scanning (CH ▲▼) Keys—Press to scan
		through the channels in memory.
		➄Menu Navigational Keys:
➃	➃	Menu—Press to display on-screen menu.
		Cursor ▲ (up) ▼ (down) keys—Press these keys to
		Cursor ▲ (up) ▼ (down) keys—Press these keys to
		move the cursor up and down within the menu.

➄

➅

Cursor < (left) > (right) keys—Press these keys to move the cursor left and right within the menu.

Enter Key—Press to select an option from the menu system, when required.

Exit Key—Press to exit from the menu system.

➅PIX Shape Key—Use to change the video display format. Available options depend on signal received and the broadcast’s aspect ratio.

Note: Cannot display picture on a full screen.

Check Aspect Ratio of broadcast. Then press the PIX Shape key to change setting.

(CONTINUED ON NEXT PAGE.)