REMOTE CONTROL OPERATION
➀Input Key—Press to select the program source to watch: Analog RF ➡ Digital RF ➡ Video 1 ➡ Video 2 ➡ Video 3 ➡ HDMI 1 ➡ HDMI 2 ➡ Analog RF.
➁Number Keys—Two keys must be pressed to select a direct channel. Example: Press 0 then 6 to select channel 6. (See item #5 below.)
Note: Numerical direct channel selection works for either Analog or Digital channels in memory but not both at the same time.
➂Info Key—Press to display the Digital and Analog Full Banner information which includes: Channel Number (Major and Minor), Tuner ID, Station ID, V-Chip Program Rating, Program Title, Audio Info, and Signal Strength, if available. (Press again to remove the display.)
➃Recall Key—Press to switch between the last two channels. The RECALL key cannot toggle between a Digital channel and an Analog channel.
➄1– – Key—For Analog Cable channels above 100, press this key, then press the other two numbers.
➅Menu Navigational Keys:Menu—Press to display the on-screen menu. Cursor ▲ (up) ▼ (down) keys—Use these keys to move the cursor up and down within the menu. Cursor < (left) > (right) keys—Use these keys to move the cursor left and right within the menu. Enter Key—Press to select an option from the menu system, when required.
Exit Key—Press to exit from the menu system.
➆Caption Key—Press to select mode options: Digital CC1 ~ Digital CC6, or Analog CC1 ~ CC4, OFF, or QuikCap.
➇Channel Scanning (CH ▲ ▼ ) Keys—Press to scan through the channels in memory.Volume Keys—PressVOL – + to adjust.➈Pix Shape Key—Use this key to change the video display format. Available options depend on signal received and the broadcast’s aspect ratio. They may include: PIX1, PIX2, PIX3, and PIX4.
➉Audio Key—Press to select the desired audio mode (if available).
POINT TOWARD DTV➀
➁
➅
➆
➇
➈
13
➉
11Sleep Key—Press this key then the “0” key to set the Sleep Off Timer. Time can be set in 30-minute increments up to 3 hours.
Note: The Sleep Timer cancels when the DTV is turned off or if a power failure occurs.
12Mute Key—Press once to mute the sound. Press again to restore.
13Reset Key—Press this key twice to restore factory settings. The DTV will automatically start Channel Search and clear all customized settings. Note: Channel scan memory database list of digital and analog channels will be replaced. If desired, personal settings can be made again using the menu options.
