➀Input Key—Press to select the program source to watch: Analog RF ➡ Digital RF ➡ Video 1 ➡ Video 2 ➡ Video 3 ➡ HDMI 1 ➡ HDMI 2 ➡ HDMI 3 ➡ Analog RF.
➁Number Keys—Two keys must be pressed to select a direct channel. Example: Press 0 then 6 to select channel 6. (See item #5 below.)
Note: Numerical direct channel selection works for either Analog or Digital channels in memory but not both at the same time.
➂Menu Navigational Keys:
Menu—Press to display on-screen menu.
Cursor ▲ (up) ▼ (down) keys—Press these keys to move the cursor up and down within the menu.
Cursor < (left) > (right) keys—Press these keys to move the cursor left and right within the menu.
Enter Key—Press to select an option from the menu system, when required.
Exit Key—Press to exit from the menu system.
➃Channel Scanning (CH ▲▼) Keys—Press to scan through the channels in memory.
Volume Keys—PressVOL – + to adjust.
➄PIX Shape Key—Use to change the video display format. Available options depend on signal received and the broadcast’s aspect ratio.
Note: If you cannot display picture on a full screen. Check Aspect Ratio of broadcast. Then press the PIX Shape key to change setting.
(CONTINUED ON NEXT PAGE.)
