MENU OPTION—CHANNEL SCAN MEMORY

ADDING DIGITAL OR ANALOG CHANNELS TO MEMORY

Channel Scan Memory is a list of active channels that you can scan through using the Channel Scan CH ▲ (up) CH ▼ (down) keys. This list can be customized by deleting and/or adding channels.

1 Press the MENU key to display the Main menu.

2

Use the CURSOR ▲▼ keys to highlight Channel

Scan Memory. Press ENTER.

3 Use the CHANNEL (CH ▲▼) keys or numerical 0 ~ 9 keys to select desired channel.

4 Press the ENTER key to add the channel. The display will change to “added.”

After 3 seconds the TV screen will display “Delete?”

OPERATING TIP:

■If one digital sub-channel is added back to the Channel Scan Memory list, all of that channel’s sub-channels will be added back.

HELP HINTS (PROBLEMS/SOLUTIONS)

SYMPTOM

CHECK THESE CONDITIONS

TRY THESE SOLUTIONS

 

 

 

Cannot select or scan some

● Channels may be removed from

● Select Channel Scan memory and

channels.

memory.

manually add channels or start an

 

● Check antenna connections.

“All Channel Search.”

 

 

● NO digital signal being broadcast.

● Weak Signal.

● Turn antenna, install signal

booster.

● V-Guide is set to block program-

● Set V-Guide to “Off” or press

ming.

RESET key to clear all settings and

 

 

restart channel search.

If you continue to experience problems, please call toll free

1-800-877-5032. We can Help!

 

36