
BASIC SET-UP & CONNECTIONS
QuickTips
■The TV will automati- cally select the correct Antenna mode for the type of signal you connect.
■TV will switch off automatically after 15 minutes if there is no signal reception (cable out or station not broadcasting).
INITIAL SET-UP
1.Install batteries in remote control, see page 7.
2.Connect signal, see below.
3.Plug in AC power cord.
4.Press POWER key to turn on TV.
5.Follow
CONNECTING CABLE SERVICE, RF ANTENNA, OR SATELLITE DISH RECEIVER TO TV
❶Cable Service ❶ Satellite Receiver | ❶RF Antenna | |
CATV IN |
|
|
CH3 |
|
|
CH4 | L- | IN FROM |
VIDEO | ||
OUT TO TV |
| SAT. |
VIDEO | L- |
|
stoppedfor15minutes.
■If you move the TV to a new location, press the RESET key twice after connecting the signal and turning on the TV.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
CATV FRANCHISE NOTE: Cable companies, like public utilities, are franchised by local government authorities.
NOTE: If you do not have a VCR connect signal directly to TV 75 ohm jack.
Audio Output Jacks
Connect external audio equipment here.
Audio/Video Input Jacks (Video2)
Connect external video equipment here (see page 6).
Note: For your convenience this TV is designed with front A/ V Jacks (Video1) to connect your video game, camcorder, and other external video equipment as shown on page 5.
IN | VCR Back |
FROM ANT. |
|
OUT 


OUT TO TV
TV Back
AUDIO | AUDIO VIDEO | UHF/VHF/CATV | |
OUTPUT | INPUT | ||
75Ω | |||
|
| ||
| VIDEO |
| |
L | L (MONO) |
| |
|
| ||
R | R |
| |
|
| ||
|
|
To enhance video detail use the
To receive cable programs, even with equipment which is capable of receiving cable channels, the consumer must subscribe to the cable company’s service.
POSITIONING THE TV
Do not position the TV in a confined area. Allow space for normal air circulation around electronic parts.
4