1.Press the MENU key.
2.Use the ▲/▼ keys to highlight CH. Scan Memory.
3.Press the + key to highlight channel number entry area.
4.Enter the channel number you want to add or delete (example): C34. For cable channels above 99, press and hold the 1 key until C1– – appears. Then enter the other two numbers.
QuickTips
■ Channels deleted from |
scan memory can be |
selected with the |
number keys. |
5.Press the + key to change the present setting. Example: Added will change to Deleted. This takes about three seconds. During that time, the word “Added” or “Deleted” will become yellow.
6.Use the 0~9 or ▲▼ keys to choose other channels to delete or add, or press the MENU key to exit.
CH. Scan Memory C 34 Deleted
Aspect Ratio
Menu Language
Select channel using ▲▼, 0~9 keys
Press MENU key to exit
■ Restoring deleted |
channels, use the |
manually add channels |
orstart CH. (Channel) |
Search from the menu. |
It may take a few |
Use this feature when digital equipment is connected to the component input jacks. The 4:3 setting is for normal viewing. The 16:9 setting changes the picture image to widescreen
viewing with minimal portion of top and bottom compressed. |
|
| ||
Aspect Ratio | ➧4:3 16:9 | |||
1. | Press the MENU key. | |||
Menu Language |
| |||
2. | Use the ▲/▼ keys to highlight Aspect Ratio. |
| ||
Press MENU key to exit | ||||
|
| |||
3.Press the
Captioning is text information transmitted along with the picture and sound so it can be displayed on the TV screen. Because different types of captions can be transmitted with the TV signal, separate captioning modes are provided. The captioning modes recognized by this model are: Caption1, Caption2, Text1, and Text2. Local broadcasters decide which caption signals to transmit.
minutes to search thru |
the available channels. |
OR
■Press the RESET keytwice.
■If CaptionTextmodeis selected and NO captioned text is broad- casted, a blackbox may appear and remain on theTV screen as shown below.
CAPTION1: This is the main mode used for program captioning (words match the program you are watching). These captions are generally one or two lines.
CAPTION2: This is an alternative mode for program captioning. Caption2 may be used by the broadcaster to provide captions in another language, such as, Spanish or French.
TWO OUTS AND TWO STRIKES
Caption1/ 2
To remove this black box, set captioning to any mode other than Text1 orText2 or press the RESET keyto
TEXT1: This mode is used to display large amounts of text. This text will appear within a black box that may be nearly as large as the TV screen. Text displayed in this manner does not generally relate to the program. These captions may be used by broadcasters to provide weather reports, community bulletins, etc.
cancelcaptioningand othercustomized settings.
■ Channel numberwill |
TEXT2: This is an alternative mode used to display large amounts of text (same as Text1).
QUIKCAP: Quikcap allows captions to toggle on and off with the Mute function. Press the MUTE key on the remote control to block the TV sound; the captions display automatically. Press the MUTE key again to restore the sound, the captions will disappear. Quikcap displays program captions in the Caption1 mode.
TONIGHT: BECOMING MOSTLY CLOUDY WITH A 40 PERCENT CHANCE OF RAIN. COLD WITH A LOW IN THE UPPER 30's WEST WIND AROUND 20 MPH, SHIFTING TO NORTHWEST AROUND MIDNIGHT. FRIDAY: MOSTLY CLOUDY AND COLDER WITH
A 50 PERCENT CHANCE OF RAIN. HIGH IN THE MID 50's.
Text1/ 2
notdisplaycontinu- |
ouslywhencaptioning |
is on. |
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
1.Press the CAPTION key on the remote control.
2.Press the 0 key to select options: OFF, CAPTION1, CAPTION2, TEXT1, TEXT2, or QUIKCAP.
13