JVC TH-A9 manual Resuming playback, Selecting playback from the DVD menu, English English

Using the DVD player

English

Resuming playback

The center unit stores the position on a disc where you want to in- terrupt playback at, and resumes playback from that position later. To let work the resuming playback, the item RESUME in the SYS- TEM menu must be set to ON beforehand. Otherwise, set it to OFF. See page 45.

To store the playback position

Selecting playback from the DVD menu

DVD discs generally have their own menus which show the disc contents. These menus contain various items such as titles of a movie, names or songs, or artist information, and display them on the TV.

You can locate a desired scene by using the menu.

English

During playback, press STOP or AUDIO on the remote control.

Or

During playback, press 7 or on the center unit.

The center unit stores the position at which STOP or 7 is pressed, and the RESUME indicator on the display window is lit. The last stored memory overrides the previous memory.

Note:

•The interrupted position is stored even when AUDIO

on the remote control, or on the center unit, is pressed to switch power OFF (standby).

❏During playback

From the remote control only:

12

		STANDBY/ON
		TV/CATV/DBS	AUDIO
			VCR
AUX	FM/AM	DVD
TITLE	SUBTITLE	DECODE	AUDIO
ZOOM	DIGEST	TIME	DISPLAY
RETURN	ANGLE	CHOICE	SOUND
CONTROL	SUBWOOFER		EFFECT
VCR				1
TV	CENTER		TEST

REAR-L

AUDIO/

PLAYTV/VCR

MODE

CATV/DBS

	ENTER
THEATER	DSP
POSITION	MODE

TV VOL CHANNEL		VOLUME
	TV/VIDEO MUTING
B.SEARCH		F.SEARCH
/REW	PLAY	FF/
DOWN	TUNING	UP

REC STOP PAUSE

MEMORYSTROBE

DVD MENU

English

To resume playback from the stored position	1	Press DVD MENU or TITLE.
While stopped, press PLAY on the remote control or press
		The menu appears on the TV screen.
3on the center unit.
		Example
Playback begins from the stored position.
• When the center unit is in standby mode, you can activate
resuming playback by pressing PLAY on the remote control.
• Changing the source during playback also stores the interrupted
position. To resume playback from the stored position, press
PLAY or DVD on the remote control. Selecting “DVD” by
pressing SOURCE or pressing 3 on the center unit will also
resume playback.

English

English

Notes:

•When you perform the resuming operation for a Video CD with the PBC function, the center unit may resume play- back from a point slightly earlier than the resume point you stored.

•Resuming playback does not work for Audio CDs.

•Resuming playback does not work for program play and random play.

To clear the stored position

To clear the stored position, perform one of the following opera- tions:

The RESUME indicator on the display window will go out.

•Open the disc cover.

•While stopped, press STOP on the remote control or 7 on the center unit once again.

•In standby mode, press AUDIO on the remote control or

on the center unit once again to turn on the system.

2Press the 2/3/5/° cursors to select a

desired item, then press ENTER.

The center unit starts playback of the selected item.

•With some discs, you can also select items by entering the corresponding number using the number buttons, which may cause the unit to automatically start playback.

About menu

Normally, a DVD disc which contains more than one title may have a “title” menu which lists the titles. In this case, the menu ap- pears on the TV by pressing TITLE. Some DVD discs may also have a different menu which appears by pressing DVD MENU. See the instructions of each DVD disc for its particular menu.

Notes:

•When appears on the TV by pressing TITLE in step 1:

The disc does not have a menu listing the titles.

•When appears on the TV by pressing DVD MENU in step 1:

The disc does not have a menu.

English

English

25