JVC TH-A9 manual Connecting the power cord, 3Replace the cover, English, Connections, Cautions

English	Connections
	Connecting the power cord

Before plugging the center unit and powered sub-woofer into an AC outlets, make sure that all connections have been made.

Plug the power cord into an AC outlet.

English	The red STANDBY lamp on the center unit lights when the power
	cord is plugged in.
	Keep the power cord away from the connecting cables and the an-
	tenna cable. The power cord may cause noise or screen interfer-
	ence.
	We recommend that you use a coaxial cable to connect the FM out-
	door antenna, since it is well-shielded against interference.

Center unit	Powered sub-woofer
English
AC power cord
English
CAUTIONS:

	•	Do not touch the power cord with wet hands.
English	•	Do not pull on the power cord to unplug the cord.
	Notes:
		When unplugging the cord, always grasp the plug
		so as not to damage the cord.

•The preset settings such as preset channel and sound ad- justment may be erased in a few days in the following cas- es:

	– When you unplug the power cord.
English	– When a power failure occurs.
	• The speakers will not produce any sound if the powered
	sub-woofer power cord is removed from the AC outlet
	while the center unit is turned on.
	In this case power will not come on even when the pow-
	ered sub-woofer power cord is plugged in the AC outlet.
	Press	on the center unit, or AUDIO	on the re-
	mote control to turn power on. This will turn the powered
	sub-woofer on and sound will be emitted from the speak-
English	ers.

Putting batteries in the remote con- trol

Before using the remote control, put two supplied batteries first. When using the remote control, aim the remote control directly at the remote sensor on the center unit.

1 2 3

1On the back of the remote control, remove the battery cover.

2Insert batteries. Make sure to match the polarity: (+) to (–).

3Replace the cover.

•If the range or effectiveness of the remote control decreases, replace the batteries. Use two R6P (SUM-3)/AA (15F) type dry-cell batteries.

CAUTIONS:

Follow these precautions to avoid leaking or cracking cells:

•Place batteries in the remote control so they match the polarity: (+) to (–).

•Use the correct type of batteries. Batteries that look similar may differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

10