New Feature for Network Operations (Remote Setup)

●How to define the detection zone

Allows you to set the motion sensor detection zone.

1Set [Motion Zone] to "PARTIAL ZONE". A button appears on the right-hand side.

2Click the button.

You are presented with a screen that prompts you to define the detection zone.

3Define the detection zone by clicking (or dragging) the appropriate grid cells.

This configures the sensor to detect a motion within your defined zone.

4ClickNew settings[OK]. are saved, and the zone definition screen is closed.

●How to define the schedule for timer recording

You can define the operational schedule for timer recording (BY SCHEDULE) by using the following steps:

1Click the [Timer set] button. The [Schedule] screen appears.

1

2

2Highlight and click the recording mode button (1). The field (2) at the upper left corner of the schedule table indicates the currently selected recording mode in a specific color.

3By clicking (or dragging) the appropriate grid cells, specify the days of the week and the time windows when recordings should occur.

This configures the DVR to record the video during the specified time windows.

You can combine multiple recording modes by repeating the steps above.

Memo: Clicking a day of the week button causes the currently selected recording mode to default to all time windows (24 hours).

4ClickNew settings[OK]. are saved, and the [Schedule] screen is closed.

10