New Feature for Network Operations (Remote Setup)

●DDNS Settings

If you intend to use Sanyo’s DDNS services, choose "SANYO" and enter your registered domain name.

Memo: • For information on how to register your domain name, refer to the instruction manual (P35).

•If you want to use third-party DDNS services, consult your dealer or a "Repair Service Center" in your local area.

Send E-Mail Settings

(P36)

 

 

This is a submenu under the NETWORK settings menu.

You can use this menu to configure the DVR to automatically send a notification e-mail to your specified address in response to an alarm event.

Changing the settings on this menu forcibly restarts the DVR.

1

2

3

4

5

1IP Notification

Selecting this check box configures the DVR to send a notification e-mail when the DVR’s IP address is changed.

2Event Alarm

Allows you to configure the DVR to send a notification e-mail when a specific type of event occurs:

•OFF (default)

Selecting this option prevents the DVR from sending any notification e-mail when an alarm event has occurred.

•By Ext. Sensor

Selecting this option causes the DVR to send a notification e-mail when a sensor or similar device connected to the DVR’s external sensor terminal is activated.

•By Motion

Selecting this option causes the DVR to send a notification e-mail when its built-in motion sensor has detected movement.

•All

Selecting this option causes the DVR to send a notification e-mail when an external sensor or its built-in motion sensor is activated.

3Mail Address

Enter the recipient’s e-mail address.

4Mail server settings

Enter the server name of your SMTP server as well as the ID and password required to log into the SMTP server.

5Return Mail-Address

Enter the return e-mail address.

When a notification e-mail cannot reach the specified recipient e-mail address, then the mail is sent to this address.

Storage Settings

(P37)

 

 

This menu provides an option to overwrite the hard disk.

If the hard disk becomes full and you want to continue recording in overwrite mode, then select the check box provided on this menu.

13