RECORD settings

Press the MENU button and enter the password.The MAIN MENU is displayed, select "RECORD" using the control button ({}~).

MAIN MENU

LIVE

RECORD

 

SYSTEM

NETWORK

HDD SET

SERVICE

RECORD

 

 

 

 

 

 

 

RESOLUTION

FULL

CHANNEL

 

C1

 

FRAME RATE

1 ips

QUALITY

NORMAL

RECORDING

CONTINUOUS

MOTION ZONE

FULL ZONE

MOTION SENSITIVITY

9

 

ALARM RECORDING

-- -- -- --

PRE RECORD

OFF

POST EVENT RECORD

5 SECONDS

AUDIO

OFF

TIMER SET

 

 

 

REAL-TIME REC SET

 

 

 

ASetting the RESOLUTIONTo set the resolution for the recordings.

Select "RESOLUTION" using the control button ({) and select a setting using the control button (}~). FULL: NTSC: 704 × 480, PAL: 704 × 576

HALF: NTSC: 704 × 240, PAL: 704 × 288QUAD: NTSC: 352 × 240, PAL: 352 × 288
BSetting a CHANNELTo set the recording settings of each channel.

Select an item for each setting using the control button ({) and select a setting value using the control button

(}~).

●Setting a CHANNELSelect "CHANNEL" and select a channel.CH1 - CH16

☞In DSR-2108, CH1 - CH8.

●Setting the FRAME RATE (Unit: ips)Select "FRAME RATE" and select a value.NTSC: OFF/1/2/ ... 29/30 (ips)PAL: OFF/1/2/ ... 24/25 (ips)

•Depending on the RESOLUTION settings, the total FRAME RATE available is limited as follows. If the total exceeds the limit the FRAME RATE of other channels cannot be set.

If FULL is selected under resolution setting:

NTSC: It is possible to select up to a total of 30 frames for channels 1 to 8 and up to a total of 30 frames for channels 9 to 16

PAL: It is possible to select up to a total of 25 frames for channels 1 to 8 and up to a total of 25 frames for channels 9 to 16

☞In DSR-2108, it is possible to select up to 30 (NTSC)/ 25 (PAL) frames.If HALF is selected under resolution setting:

NTSC: It is possible to select up to a total of 60 frames for channels 1 to 8 and up to a total of 60 frames for channels 9 to 16

PAL: It is possible to select up to a total of 50 frames for channels 1 to 8 and up to a total of 50 frames for channels 9 to 16

☞In DSR-2108, it is possible to select up to 60 (NTSC)/ 50 (PAL) frames.If QUAD is selected under resolution setting:

NTSC: It is possible to select up to a total of 120 frames for channels 1 to 8 and up to a total of 120 frames for channels 9 to 16

PAL: It is possible to select up to a total of 100 frames for channels 1 to 8 and up to a total of 100 frames for channels 9 to 16

☞In DSR-2108, it is possible to select up to 120 (NTSC)/ 100 (PAL) frames.

•Calculation of the total FRAME RATE is performed using the FRAME RATE set in the RECORD menu or the FRAME RATE set in the REAL-TIME REC SET menu, whichever is greater.

●Setting the QUALITYTo select "QUALITY" and select the video quality.Selections: NETWORK/ECONOMY/BASIC/NORMAL/FINE●Setting the RECORDINGTo select "RECORDING" and select the recording mode.•CONTINUOUS (P17)Recording is performed while this unit is turned on.•MOTION recording (P17)

Recording is performed as soon as the internal motion sensor of this unit reacts.

35