Manuals / Brands / TV and Video / DVR / Sanyo / TV and Video / DVR

Sanyo DSR-2108, DSR-2116 Enter, Select, Up/Down key:, Left/Right key:, Enter key: Enter, IRIS/TOUR/SEQUENCE, b Camera menu settings, Enter key: Tour/Sequence OFF

1 92

Download 92 pages, 5.29 Mb

Operating the PTZ dome camera

3

bIris/Tour/Sequence operations

1Select "IRIS/TOUR/SEQUENCE" using the control button ({) and press the ENTER button.

2To perform tour operations press the control button ({), to stop tour operations press the ENTER button.

3To perform sequence operations press the control button (), to stop sequence operations press the ENTER button.

4Adjust the aperture using the control button (}~).

• The following message is displayed on the screen. Up/Down key: Tour ON/Sequence ON Left/Right key: Iris Close/Open

Enter key: Tour/Sequence OFFb Camera menu settings1Select "MENU" using the control button ({) and press the ENTER button.

2Select a menu using the control button ({) and select a setting value using the control button (}~).

3To switch to the next screen or validate a settingvalue press the ENTER button.•The following message is displayed on the screen. Up/Down key: Cursor Up/DownLeft/Right key: Cursor Left/RightEnter key: Enter4Press the EXIT/STOP button once operation are complete.

If no "PROTOCOL" is set on the PTZ screen, the following message is displayed on the screen.

"Please set up a camera type in setup menu."

15

Contents

About this manual Refer to the included Utilisez le Consulte en el DSetting the RS-485termination switch D Camera sequencing Configuration and function of the Menu settings Operations using the Web browser Mounting the hard disk (S-ATA) RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE A RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLEPARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Do not attempt repairs on your own bDisassembly prohibited bDo not place any foreign objects inside the unit bMake sure the power cable is not damaged •Always use the power cable supplied with the unit bDo not use during thunder/thunder storms Do not use during thunder/thunder storms Never touch the connection cable during thunder/thunder storms. This may cause electrocution bCleaning the internal components bDo not block the cooling fans or air ducts • This unit is equipped with air ducts and cooling fans in order to assist the ventilation of hot air produced by the hard bBack up battery bMaintaining this unit Battery fluid leaks When disposing of this unit RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE •Long-timeMPEG4 recording •Moving video monitoring in split screen •Coaxial superimposed type (COAX) camera control •Maximum recording speed DSR-2116:240 IPS (NTSC) or 200 IPS (PAL) (DSR-2116)(DSR-2108) Always turn the power off when moving in and out of racks or other shelves G Do not remove the power plug while recording or playing images back G Do not expose to shock or vibration Consult the dealership where this unit was purchased for hard disk replacement (DSR-2116) 1Power button and indicator () USB terminal (USB) (Exclusively for 2.0) (P26) To save video, connect a USB memory 3Disc drive •Feed additional units with the same power source. Stored data may be lost Camera 1Video input terminal (VIDEO IN/LOOP OUT) 2Video output terminal (S-VIDEO) 3Monitor 2 video output terminal (MON2) LAN connection bUsing the switching hub Internet (DHCP, ADSL) connection bWithout using a switching hub A (SANYO SSP) To connect a Sanyo PTZ dome camera or system (SANYO SSP) controller B (SANYO SSP) A (EXCEPT SANYO) ASwitching the power on 1Connect the power cable to the outlet Turn on the electricity, the power indicator lights in orange (standby) 2Press the power button The power indicator changes to green (running) and initialization starts Upon turning the power on, live video is displayed in the multi screen format bExample of multi-16screen 1Operation display : Displayed during live video sequencing : Displayed during alarm output ASettingoutput the television system and the monitor •Do not forget to turn off the power when adjusting the settings BSetting the clock (CLOCK SET) 1Press the MENU button bMatching the television system of the camera (PAL) 3 Press the control button (~) twice and select the 1 Select the "GMT AREA" using the control button "SYSTEM", press the ENTER button The SYSTEM settings screen is displayed the control button (}~) 9Select "CONFIRM" using the control button (}~) and press the ENTER button The unit automatically restarts, the initializing screen is displayed bCorrecting the set time CSetting the language (LANGUAGE) 1Follow steps 1 to 3 of the CLOCK SET procedure ASingle-screendisplay Example: Displaying camera 2 on single-screen Press "2" on the camera selection button BQuad-screendisplay 1Press the QUAD button CMulti-screendisplay Displays the videos of 16 or 9 cameras simultaneously 1Press the MULTI button The videos of camera 1 - 16 are displayed on a multi-16screen ☞In DSR-2108,the only available multi-screenis multi-8screen Connection Operation Refer to "Connecting the RS-485control terminal (P6) Refer to 2Press the PTZ button bIris/Tour/Sequence operations IRIS/TOUR/SEQUENCE To perform tour operations press the control button To perform sequence operations press the control button 4Adjust the aperture using the control button (}~) This unit allows the following recording modes bTypes of recording modes A Real time recording (R) Records manually videos being monitored B CONTINUOUS recording (C) BCONTINUOUS recording 1Recording starts automatically when this unit is turned on “C” disappears CMOTION recording A motion sensor can be set for each channel DALARM recording Connecting an external switch to an external alarm Select "PRE RECORD" using the control button 1 input terminal ({|) and select the pre recording as necessary ESCHEDULE recording Adjusting the following settings using the control • Selecting an identical setting for every day 1 button ({|}~) (Example: CONTINUOUS): bCopying a set recording schedule to other channels The following recorded videos searching methods are available bEVENT SEARCH (P22) bBOOKMARK (P25) Searches through the bookmarked still images or moving videos bTIMELINE SEARCH (P23) AEVENT SEARCH Select the type of recording (M/A/R/C) to be 1 The menu screen is displayed 5 searched using the control button (}~) and press the ENTER button BTIMELINE SEARCH Move the yellow cursor of the HOUR scale to the 4 specified period using the control button ({|) and Select "TIMELINE SEARCH" using the control press the ENTER button CT/D SEARCH 1Press the SEARCH button 2Select "T/D SEARCH" using the control button ({|) and press the ENTER button Select the date and time to be played back using the control button 4Press the ENTER button. Playback starts GBOOKMARK 1Press the SEARCH button. The menu is displayed 2Select "BOOKMARK" using the control button ({|) and press the ENTER button Select an event which date is displayed in red using the control button Select the date to be played back from the list using the control button AInserting recording media BCopying live videos The copy screen is displayed after the "BOOKMARK OK" message 1To copy onto a USB memory Connect a USB memory to the USB terminal on the front panel CCopying a playback video The image to be copied can be selected on still and moving images The video is paused and the BOOKMARK screen is displayed Select the copy mode (STILL or VIDEO) using the control button •STILL: bSetting a security lock bCanceling the security lock bLIVE settings (P31) bRECORD settings (P35) To perform adjustments related to live To perform adjustments related to videos monitoring such as sequencing bBasic operations of the MAIN MENU 4Press the ENTER button The RECORD menu is displayed Select an item using the control button • "1111" is the factory default setting password LIVE bFunction of the menu operation button MENU: EXIT/STOP: ENTER: DSetting a CHANNEL ●Setting a CHANNEL and the channel designation Selections: CH1 - CH16 ☞In DSR-2108,CH1 - CH8 2Select the input position using the control button ●Setting the VIDEO LOSS ON VIDEO LOSS ON ●Setting the HDD ERROR HDD ERROR ●Setting the ALARM DURATION ●Setting the SEQUENCE Sets whether the output video automatically switches to the MON2 terminal 1Select "SEQUENCE" using the control button ({|) 2Set ON/OFF using the control button (}~). ON: Automatically switches OFF: Does not automatically switch Press the MENU button and enter the password The MAIN MENU is displayed, select "RECORD" using the control button ({|}~) ASetting the RESOLUTION To set the resolution for the recordings 704 × 480 •ALARM (P18) •SCHEDULE (P19) •DISABLE No recording is performed ●Setting the MOTION ZONE (Refer to "MOTION recording": P17) The MAIN MENU is displayed, select "SYSTEM" using the control button ({|}~) ASetting the DVR ID 1Select "DVR ID" using the control button ({|) and press the ENTER button The DVR ID screen is displayed Input the unit designation (Example: DSetting an ADMIN PASSWORD Select "ADMIN PASSWORD" using the control button The "Current" password input screen is displayed bSettings for no password It is possible to enter the menu settings screen without inputting a password bRestoring the password input 1Press the MENU button, select SYSTEM and press the ENTER button Current ESetting the USER PASSWORD limited to search and playback GSetting the DATE FORMAT Refer to "Setting the clock (CLOCK SET)". (P9) HSetting the CLOCK SET ISetting the RS485 SET 1Select "RS485 SET" using the control button ({|) and press the ENTER button LSetting a REMOTE CONTROL ID Remote control display bOperating this unit via the remote controller ID (Example: 4) Select "REMOTE CONTROL ID" using the control button Selection: 01/02/ ... 98/99 ASetting the PORT 1Select "PORT" using the control button ({|) and press the ENTER button PORT Select a value using the control button BSetting a CLIENT ACCESS DSetting the NETWORK TYPE NETWORK TYPE 1Select "NETWORK TYPE" using the control button ({|) 2Select a type using the control button ({|). Selection: DHCP, ADSL, LAN DHCP, ADSL, LAN bIf selecting LAN 1Select "IP" using the control button ({|) and press the ENTER button The IP ADDRESS input screen is displayed Change the IP number using the control button 3Repeat 2 and change the following as necessary USER ID PASSWORD 6Enter the domain name to be used and click the Submit button 8Press the ENTER button FSetting the SEND E-MAIL •MAIL TO GSetting the NTP SET Select "NTP SET" using the control button •MAIL SERVER USER: The MAIN MENU is displayed, select "HDD SET" using the control button ({|}~) ASetting the OVERWRITE OFF: When the capacity becomes full the recording stops BFORMAT settings Initializes the internal hard disk CSetting the auto delete function 1Select "AUTO DELETE" using the control button ({|) and select a setting using the control button Select "AUTO DELETE DAYS" using the control button SERVICE ASetting the SAVE SETUP TO A USB 1Connect the USB memory to the USB terminal Select "SAVE SETUP TO A USB" using the control button 3Select "CONFIRM" using the control button (}~) and press the ENTER button Sanyo DVR Utility 2000S Prior to performing network operations make the following preparations •Network connection: Connect this unit and the PC using a LAN or Internet connection. (P5) •Network settings: 3Select the setup type on the [Setup Type] screen and click [Next] Typical Light 5The software starts installing Setup Status bConnecting for the first time 1Click the connect button on the operation panel The connection dialog [Connect] is displayed ☞In DSR-2108,the multi-screenswitch button displays a multi-8screen •Site Name: 1Video display area <Screen display method ☞In DSR-2108,the only available multi-screenis multi-8screen <Camera information 1(Top left): <16 channels Scrolling connected sites (Select Site) 2Connect/Disconnect button 3Screen display switch button (P55) 4Camera controller (Only for PTZ dome camera) ASwitching the display mode of the screen Allows you to select the display mode for live and playback video bSingle-screendisplay The video of the specified camera is displayed in single-screen bMulti-screendisplay bSequence (camera switch) display (Multi-9screen sequence is available in DSR-2116only.) BRecording live video bRecording method <Recording mode CFreezing the live video Click the still button on the operation panel Pausing the video will also stop the live audio 2To unfreeze the image Click the unfreeze button on the operation panel FOperating the PTZ dome camera Sets the menu using this unit Displays the live video and specifies the camera to be operated 3Operates the camera using the camera controller on the operation panel Clicking the controller button (/) switches the controller display 1 Function of the operation panel 2 Functions of the time scale 1Calendar 2[LIVE] button 3Playback operation button Plays back the searched video ASearching and playing recorded video 1Select the search destination (DVR/PC) The search destination can be confirmed by looking at the button display •DVR: Searches the video recorded on the DVR (this unit) BBacking up DVR recorded video Refer to steps 1-3of "Searching and playing recorded video (P60) 6Click [BACKUP] AVI Backup 1Specify the search destination (DVR/PC). Set to "DVR Setup AGeneral settings (General) 1Security Option •Startup: •Shutdown: BCamera designation settings (Site) Connect Site 3Select the number of channels on the DVR (4/8/16 CH) using the "CH Mode The input box is displayed CEvent settings (Event) Sets the event management method 1Log Sets the storage location and allowable size of the event log 2Event ERecord settings (Record) 1Record Condition Select a recording mode using the radio button <Automatic recording settings (Auto Record) If [Record Condition] is set to "Event", set the following conditions A Remote Setup operating procedure 1 Click the MENU button on the operation panel 5 Click [Apply] or [OK] Remote-Setup Success BSetting the Display bCommon settings (General) bChannel-specificsettings 1OSD 2Sequence CSetting the Alarm-Set bAlarm Out bSetting an alarm input terminal bSetting an alarm output terminal 1Alarm Out No DSetting the Monitor2 1MON2 Type 2MON2 Event 3MON2 Event Dwell Time 4Sequence 9FG bSetting the detection frame 1Set [Motion Zone] to "PARTIAL ZONE". A button is displayed to the right 2Click the button 3Click (or drag) a grid cell in the desired detection frame bSetting the SCHEDULE recording FSystem settings Settings related to the system and time bSetting the System 1DVR ID (P37) Sets individual designation to DVRs GDescription •H/W Version •S/W Version •Storage Size: Hard disk capacity •IP Address ISetting the Network To set information about the DVR network The DVR will be forcibly restarted if a value on this screen is changed bDDNS settings bNetwork settings JSetting the Send E-Mail This sub menu is accessible from the Network settings 1Send E-mail •ON: E-mailsending function enabled •OFF: E-mailsending function disabled 1Start the Web browser (Internet Explorer) 2Input the URL 3Input the password in the Web Page Dialog. (Authentication check) 4Click the [Connect] button Clicking [Cancel] closes the Web browser's screen KMO bSaving still images to the PC 1Click the Capture button 2Select the [Channel] 2 to be saved 3Click the [OK] 3 button bSaving moving videos to the PC bInserting batteries in the remote control 1Take the battery cover off 2Place the batteries and fit the cover JbOperation range 1REC/STOP button bDimensions (unit: mm) ☞Dimensions of DSR-2116and DSR-2108are the same bDVR ID input display list DISK A (HDD 1) DISK B (HDD 2) HDD Page Page Page SANYO Electric Co., Ltd