Sanyo DSR-M804P manual Normal RECORDING/TIMER Recording, Normal recording, Timer recording

3NORMAL RECORDING/TIMER RECORDING

[TIMER] button

FULL indicator [REC/STOP] button

Normal recording

Follow the steps below to record the monitored image onto the hard disk.

zWhen using the recorder for the first time, check that the TV SYSTEM selector switch on the rear panel is set to “PAL” correctly. If this switch is set incorrectly, recording will not be performed correctly. (JP. 8)

1 Press the [REC/STOP] button.

The REC/STOP indicator lights. “REC” appears on the screen, and recording starts.

Recording symbol	REC	HI	A
	20 - 05 - 03 08 : 30 : 35
		1	2
		3	4

zWhen you record for the first time, the default settings are used. To change the image quality. (JP. 32)

zWhen the OVER WRITE recording setting is “ON”, the DVR starts recording from the beginning again. When it is “OFF” and the remaining space reaches zero, recording stops and the FULL indicator lights. (JP. 33)

zYou can record and play back images at the same time. (JP. 17)

zYou cannot change the menu during recording.

Ending normal recording

2 Press the [REC/STOP] button for about

3 seconds.

The REC/STOP indicator turns off and recording stops.

Timer recording

Follow the steps below to record the monitored image onto the hard disk at the set time.

1 Press the [TIMER] button.

The TIMER indicator lights, and the digital video recorder enters timer recording standby mode.

HI	A
20 - 05 - 03 08 : 30 : 35
1	2
3	4

zA warning tone sounds if timer recording has not been set.

(1) See P. 35 for how to set timer recording.

(2) When the time specified in the timer settings arrives, the REC/STOP indicator lights, “REC” appears in the screen, and recording starts.

(3) When the set end time arrives, the REC/STOP indicator turns off, and recording stops.

(4) The following restrictions apply to normal recording and timer recording.

z After making “PICTURE QUALITY” or “AUDIO RECORDING” menu settings and returning to the camera screen, recording does not start for a maximum of 6 seconds (although normal recording and timer recording operations can be made).

z After recording finishes (the REC/STOP indicator turns off), recording does not start for a maximum of 10 seconds (although normal recording and timer recording operations can be made).

zWhen the remaining memory space for recording reaches zero, recording stops, and the FULL indicator lights. You can start recording from the beginning again by changing the “OVER WRITE” setting. (JP. 33)

zYou can record and play back images at the same time. (JP. 17)

Stopping during timer recording

2 Press the [TIMER] button.

The TIMER indicator turns off and recording stops.

English 15