Sanyo DSR-M810 ] and, button, button, ] button, ] button, Press the, ] buttons to, Press the [ ] and, ] buttons to select, “REC STOP” and press the

e00_l8hae_us_7.book Page 41 Thursday, April 8, 2004 11:14 AM

6RS-485/NETWORK SET

[Settings] (‹ indicates default setting.)								1 Press the [MENU] button.
	Item			Setting		Description		The MENU indicator lights up and the <MAIN MENU>
	REMOTE AS			VCR	When the digital video recorder is operated
								screen appears.
					from a controller, sets it to operate as a
(1)					VCR.			Select “6.RS-485/NETWORK/REMOTE SET” and press
			‹ DVR		When the digital video recorder is operated
								the [	] button.
					from a controller, sets it to operate as a
					digital video recorder.			The <RS-485/NETWORK/REMOTE SET> screen
(2)	DATA SPEED				Used to select the communication speed.			appears.
					Selections: 19200/2400/4800/9600
(3)	STATUS INFO			ON	Status information is sent.
			‹ OFF		Status information is not sent.
(4)	ALARM INFO			ON	Alarm information is sent.
			‹ OFF		Alarm information is not sent.
	ADDRESS*				Set the digital video recorder’s address
(5)					when using RS-485.
					Setting range: 000 to 127
								2
3	Press the [			] and [		] buttons to select			Press the [ ] and [ ] buttons to select
	the desired item, then press the [						]		“REC STOP” and press the [	]
	button.								button.
4	Press the [ ] and [					] buttons to		“DISABLE” flashes.
	change the setting, then press the
	[	] button.

5 Use the same procedure to set the other items as needed.

6 Press the [EXIT/OSD] button.

The display returns to the normal screen.

			3 Press the [ ] and [ ] buttons to
	Setting REMOTE SET		change the setting, then press the
Use the following procedure to specify whether or not		[		] button.
recording is to be stopped when the [REC] button on the			[Settings] (‹ indicates initial setting.)
separately-sold VA-RMN01 wired remote controller is
			Setting	Description
pressed. When a setting of “ENABLE” has been made, the
remote controller's [REC] button can be pressed for 2			‹DISABLE	Recording will not be stopped when the remote
seconds or longer to stop recording.				controller’s [REC] button is pressed.
			ENABLE	Recording will be stopped when the remote
				controller’s [REC] button is pressed for at least
				2 seconds.

zRegardless of this setting, if the [REC] button is pressed

and released quickly (i.e., within 2 seconds), recording	4 Press the [EXIT/OSD] button.
will be started.
	The display returns to the normal screen.

English 41