Connecting your Monitor
ENGLISH
Be sure to read the Monitor Safety and Warranty manual that comes with your monitor before carrying out this procedure.
1.Turn off your computer and all attached devices.
2.Connect the signal cable to the video port on the back of your computer. This port might be directly attached to your computer (figure A), or it might be part of a video adapter card (figure B). The video port on your computer or video adapter card may be colored blue to match the blue connector on your monitor’s video cable.
FRANÇAIS
The ac adapter and signal | 3. Connect the power cord to the power adapter and then plug the power |
cable are connected to | cord into a properly grounded outlet. |
your monitor. If you wish to |
|
change these or to fit a different |
|
stand, see the Further help |
|
section (page 19). |
|
Switching on your Monitor
1.Switch on the power source and your computer.
2.Switch on your monitor by pushing and releasing the power switch marked .
To switch off your monitor, push and release the power switch again.
3.Turn on the monitor and then the computer.
COMPL & WARR JAPANESE ITALIANO ESPAÑOL
6