Installing the Auto Gen Start

 

 

 

 

Wiring harness

Connections to the generator, thermostats, and external on/off switches

 

are made using a wiring harness that plugs into the 20-contact connector

 

(see Figure 2-1). The wires on the wiring harness can be extended to meet

 

installation requirements. When extending the wire harness, ensure that

 

the extension wires are the same color as the wires on the harness.

 

To install the Auto Gen Start using the wiring harness:

 

1. Connect each wire on the harness to its intended wire or contact on

 

the generator, thermostats, or external switches.

 

2. Plug the harness into the connector on the bottom panel of the Auto

 

Gen Start.

 

 

 

Wire

Each wire on the harness is identified by a number and a color. The wire

identification

numbers are shown in Figure 2-2 and their colors and functions are

 

described in Table 2-1.

 

 

 

Wire size and

Required wire sizes for the external connections to the wiring harness are:

length

 

 

 

 

 

0–30 ft. (9 m)

 

Over 30 ft. (9 m)

 

 

 

 

 

 

 

 

18 AWG

 

16 AWG

 

 

 

 

 

When planning the routing for external connections, ensure that wire lengths are sufficient to plug the wiring harness into the Auto Gen Start once all the external connections are complete.

Figure 2-2Auto Gen Start wiring harness

975-0082-01-01

2–7

Page 29
Image 29
Xantrex Technology Automatic Generator manual To install the Auto Gen Start using the wiring harness

Automatic Generator specifications

Xantrex Technology has established a reputation for excellence in the power management sector, and its Automatic Generator Start (AGS) system is a prime example of this commitment to innovation. This advanced technology is designed for use in recreational vehicles (RVs), marine applications, and remote cabins, providing a reliable solution for maintaining power during off-grid conditions.

One of the main features of the Xantrex AGS is its ability to automatically start and stop generator engines based on specific parameters set by the user. This ensures that power is available when needed, while also preserving fuel and extending the life of the generator itself. The AGS monitors the battery voltage closely, activating the generator if it drops below a predetermined threshold. Once the battery is adequately charged, the system will automatically shut the generator off, preventing unnecessary fuel consumption and wear on the engine.

The Xantrex AGS operates using a sophisticated microprocessor that allows for precise control and adaptability. This technology enables users to customize various settings according to their power needs, ensuring optimal efficiency. Users can also configure the system to respond to temperature or water level conditions, tailoring the performance to specific environments and requirements.

In addition to its automatic functionality, the Xantrex AGS is designed with user-friendliness in mind. A clear, intuitive interface allows for easy setup and adjustments, ensuring that anyone can operate the system effectively. This is particularly advantageous for users who may not be technically inclined or those who are new to generator technology.

Moreover, the system is equipped with advanced safety features that protect both the generator and the connected devices from potential damage. This includes overload protection and additional protocols that prevent the generator from starting during unsafe conditions, providing peace of mind to users.

Overall, the Xantrex Technology Automatic Generator Start system exemplifies a blend of innovation, practicality, and safety features. With its ability to manage power effectively while reducing operational costs, it is an indispensable tool for anyone who relies on a generator for off-grid power supply. Whether for adventures in an RV, tasks on a boat, or maintaining remote properties, the Xantrex AGS stands out as a top choice for reliable automatic generator management.