Emerson ATCA-7150 manual Module Installation and Removal, Personal Damage through Electric Shock

Installation of the RTM-ATCA-7150

2.4Module Installation and Removal

Personal Damage through Electric Shock

There is current in the power cords and communication cables. Touching the connectors of the power cords and communication cables may cause electric shock.

Do not touch the connectors of power cords and communication cables

Damage of Circuits

Electrostatic discharge and incorrect installation and removal of the product can damage circuits or shorten their life.

Before touching the product or electronic components, make sure that your are working in an ESD-safe environment.

Module Damage

If the blade is not fully aligned with the interface in the backplane, too much force may twist the pins on the blade or backplane.

Do not exert too much force when you insert the blade.

Note the following points at the time of installing RTM-ATCA-7150:

zMake sure that you wear an electrostatic discharge (ESD)-preventive wrist strap to prevent the static electricity from hurting you or damaging the device.

zKeep your personal objects such as your clothes away from RTM-ATCA-7150. To prevent the static electricity on clothing, you need to put on antistatic clothing.

zRTM-ATCA-7150 is installed in the slot paired with the server blade slot at the back side of the shelf. You should install RTM-ATCA-7150 before the server blade is installed. Otherwise, RTM-ATCA-7150 cannot be powered on normally.

38 ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)