Emerson RTM-ATCA-7150 manual Replacing the Dimm, Installing the Dimm

Hardware Installation of ATCA-7150

7.Insert the ATCA-7150 with the DIMM installed in the shelf.

For details, see Installing the ATCA-7150 in a Powered Shelf on page 91.

Figure 3-4 Installing the DIMM

2

2

1

You can install the DIMMs in other DIMM interfaces in the same way.

After installation, insert the ATCA-7150 in the shelf and power on the ATCA-7150. Check whether the OS can be loaded properly. If it can be, in the OS, check whether the displayed memory capacity is consistent with the actual one.

3.6.4.2Replacing the DIMM

To replace the DIMM, proceed as follows:

1.Wear the ESD-preventive wrist strap.

For details, see Wearing the ESD-Preventive Wrist Strap on page 75.

2.Remove the ATCA-7150 whose DIMM is to be replaced.

84 ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)