Installation of the RTM-ATCA-7150
7.Insert the FC daughter card in RTM-ATCA-7150 by facing the daughter card at an angle of 45° to the RTM. Align the daughter card connector with the connector on RTM-ATCA-7150, and the daughter card positioning holes with the plastic supports on RTM-ATCA-7150. Exert even power downwards until the daughter card connector is fully inserted into the connector on RTM-ATCA-7150 and the daughter card is fastened by the plastic latches. See step 3 in the figure above.
8.Install RTM-ATCA-7150 whose FC daughter card is replaced. For more information refer, Installing RTM-ATCA-7150.
After replacement, check if RTM-ATCA-7150 can be powered on and work normally. Use the optical fibre to connect RTM-ATCA-7150 to the external storage system. Check if RTM-ATCA- 7150 can transmit data normally and monitor whether the FC status indicator is normal.
2.7Installing and Removing the RTM-ATCA-7150
2.7.1Installing RTM-ATCA-7150
Product Damage
You can install RTM-ATCA-7150 into a system if the front blade is already installed or if it is not installed. In case the front blade is already installed, its payload has to be powered down first.
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B) | 59 |
