Emerson RTM-ATCA-7150 manual Environmental and Power Requirements, Environmental Requirements

Hardware Installation of ATCA-7150

3.3Environmental and Power Requirements

The following environmental and power rewuirements are applicable to the blade.

3.3.1Environmental Requirements

Table 3-2 Environmental Requirements

	Requirement	Operating	Non-Operating
	Temperature	+5ºC (41ºF) to +40ºC (105ºF) (normal	The SAS drives can meet this
		operation) according to NEBS Standard GR-	max temperature range of
		63-CORE	non-operating.
		-5ºC to +55ºC (exceptional operation)	-40ºC (-40ºF) to +70ºC
		according to NEBS Standard GR-63-CORE	(158ºF).
	Temp. Change	+/- 0.25ºC/min according to NEBS Standard	+/- 0.25ºC/min
		GR-63-CORE
	Rel. Humidity	5% to 85% non-condensing according to	5% to 95% non-condensing
		Emerson Network Power-internal	according to Emerson
		environmental requirements	Network Power-internal
			environmental
			requirements
	Altitude	<=3000 m
	Maximum weight	4.0 kg
	Length x width x	322.3 mm × 280 mm × 29 mm
	height
	Vibration	0.1g from 5 to 100 Hz and back to 5 Hz at a	5-20 Hz at 0.01 g2/Hz
		rate of 0.1 octave/minute	20-200 Hz at -3.0 dB/octave
			Random 5-20 Hz at 1
			m2/Sec3
			Random 20-200 Hz at -3
			m/Sec2
	Shock	Half-sine, 11 m/Sec, 30mSec/sec2	Blade level packaging
			Half-sine, 6 mSec at 180
			m/Sec2
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)			71