Emerson RTM-ATCA-7150 manual Wearing the ESD-Preventive Wrist Strap

Installation of the RTM-ATCA-7150

To wear the ESD-preventive wrist strap, proceed as follows:

1.Wrap the ESD-preventive wrist strap around your wrist, as shown in the figure below.

2.Fasten the latch. Make sure that the ESD-preventive wrist strap well touches your bare wrist.

3.Insert the grounding terminal of the ESD-preventive wrist strap in the jack of the cabinet or shelf.

There is a jack for inserting the ESD-preventive wrist strap respectively in the lower right corners at both front and back sides of the shelf.

Figure 2-1 Wearing the ESD-Preventive Wrist Strap

ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B) 41