Emerson RTM-ATCA-7150 manual Installing Blade Accessories, Removing the Blank filler blade

Hardware Installation of ATCA-7150

Before you install the ATCA-7150 suite, remove blank filler blades from installation slots as follows:

1.Use a screwdriver to anticlockwise loosen the two captive screws on a blank filler blade, as shown in Figure 3-2.

2.Pull the blank filler blade out of the slot, as shown in Figure 3-2.

Figure 3-2 Removing the Blank filler blade

2

1

1

3.6Installing Blade Accessories

78 ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)