Xantrex Technology Automatic Generator manual Exercise Time, Relay3

The Auto Gen Start Menu

	Important: Ensure that you do not set Exercise Duration for longer than “Max
	Run Time”. Attempting to do so will generate a warning on the System Control
	Panel.
	Important: Consult your generator manual or a service representative from
	your generator’s manufacturer for the recommended exercise duration.
Exercise Time
Purpose	“Exercise Time” allows you to set the time of day that the Auto Gen Start
	exercises the generator.
	This setting also requires you to set an Exercise Period and an Exercise
	Duration.
	Values	Default
	12:00AM to 11:50PM (12-hour clock)	9:00AM
	00:00 to 23:50 (24-hour clock)
	(increments of 10 minutes)
When to use	You must set the Exercise Time when you have set the Exercise Period
	and the Exercise Duration.
Outcomes	If you have set the Exercise Time, the generator will start at that time after
	being inactive for the Exercise Period.
	If the Exercise Time you have set occurs during Quiet Time, the generator
	will start when Quiet Time is over and run for the full amount of time you
	have set for “Exercise Dur”.
Relay3
Purpose	“Relay3” sets the function of Relay 3 of the Auto Gen Start. The function
	of Relay 3 affects contacts 19 and 20 of the 20-contact connector and
	external wiring harness.
	Values	Default
	NotUsed, Preheat, PreheatSDByp	NotUsed
When to use	Selecting a value for “Gen Type” automatically configures “Relay3”.
	You may have to manually set “Relay3” according to your make and type
	of generator.

975-0082-01-01 3–31