Installation

Connecting the control panel and other network-enabled devices

CAUTION: Equipment damage

Connect only to other Xanbus-enabled devices.

Although the cabling and connectors used in this network system are the same as Ethernet connectors, this network is not an Ethernet system. Equipment damage may result from attempting to connect these two different systems.

To connect the Auto Gen Start to a System Control Panel or another network-enabled device, plug a Xantrex network cable or equivalent from another device into one of the network connectors on the bottom panel of the Auto Gen Start. See Figure 2-1 on page 2–4.

If the Auto Gen Start is being installed on an existing Xanbus system, the system must first be put into Safe mode. See “Changing System Modes” on page 4–6.

Depending on the layout of the Xanbus system, you have the following options for the other network connector on the Auto Gen Start:

•A second network cable (in a “daisy-chain” network layout)

•A network terminator (in a “daisy chain” network layout where the Auto Gen Start is the last device at one end of the network)

•Nothing (in a multi-drop backbone layout)

Verifying power is available

When the Auto Gen Start has been installed properly, the Power and Network indicator lights turn on.

If one or both lights are out, check the network connections and ensure the network power supply is on.

2–26

975-0082-01-01

Page 47 Page 49
Page 48
Image 48
Xantrex Technology Automatic Generator manual Verifying power is available
Page 47 Page 49

Automatic Generator specifications

Xantrex Technology has established a reputation for excellence in the power management sector, and its Automatic Generator Start (AGS) system is a prime example of this commitment to innovation. This advanced technology is designed for use in recreational vehicles (RVs), marine applications, and remote cabins, providing a reliable solution for maintaining power during off-grid conditions.

One of the main features of the Xantrex AGS is its ability to automatically start and stop generator engines based on specific parameters set by the user. This ensures that power is available when needed, while also preserving fuel and extending the life of the generator itself. The AGS monitors the battery voltage closely, activating the generator if it drops below a predetermined threshold. Once the battery is adequately charged, the system will automatically shut the generator off, preventing unnecessary fuel consumption and wear on the engine.

The Xantrex AGS operates using a sophisticated microprocessor that allows for precise control and adaptability. This technology enables users to customize various settings according to their power needs, ensuring optimal efficiency. Users can also configure the system to respond to temperature or water level conditions, tailoring the performance to specific environments and requirements.

In addition to its automatic functionality, the Xantrex AGS is designed with user-friendliness in mind. A clear, intuitive interface allows for easy setup and adjustments, ensuring that anyone can operate the system effectively. This is particularly advantageous for users who may not be technically inclined or those who are new to generator technology.

Moreover, the system is equipped with advanced safety features that protect both the generator and the connected devices from potential damage. This includes overload protection and additional protocols that prevent the generator from starting during unsafe conditions, providing peace of mind to users.

Overall, the Xantrex Technology Automatic Generator Start system exemplifies a blend of innovation, practicality, and safety features. With its ability to manage power effectively while reducing operational costs, it is an indispensable tool for anyone who relies on a generator for off-grid power supply. Whether for adventures in an RV, tasks on a boat, or maintaining remote properties, the Xantrex AGS stands out as a top choice for reliable automatic generator management.
Top Page Image Contents