How to operate
1.Press the Menu button on the control panel or the MENU button on the remote control to open the OSD menu.
2.When OSD is displayed, use S / T to select any feature in the main menu.
3.After selecting the desired main menu feature, press X to enter
4.Adjust the settings with W / X.
5.Press the Menu button on the control panel or the MENU button on the remote control, the screen will return to the main menu.
6.To exit OSD, Press the Menu button on the control panel or the MENU button on the remote control again. The OSD menu will close and the projector will automatically save the new settings.
Picture (Computer / Video Mode)
Brightness
Brighten or darken the image.
Contrast
Set the difference between light and dark areas.
Color Setting
Adjust the color temperature. At higher temperature the screen looks colder; at lower temperature, the screen looks warmer. If you select “User”, “Red”, “Green” and “Blue” can be adjusted.
Keystone
Correct the keystone distortion.
Computer Mode
Video Mode
Aspect Ratio (Computer Mode)
Select how the picture fits on the screen:
1:1 : If input source is bigger than DMD output resolution, 800x600
it will full all the whole screen and ignore the aspect ratio.
