Air Circulation
Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.
-Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.
-Keep the exhaust vent at least 90 cm away from any objects.
-Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used.
-Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also cause fire hazard by heat.
Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.
EN-4
Installing the Projector in Proper Position
Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard.
Do not tilt the projector side- ways.
Do not point the projector up to project an image.
Do not point the projector down to project an image.
Do not put the projector on either side to project an image.
Do not pitch the projector more than 6 degrees backward and forward.
Moving the Projector
When moving the projector, replace the lens cap, retract the elevator foot and tilt- adjustment foot to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case with the lens side up to protect the projector.
When handling the projector, do not drop, bump, subject it to strong forces, or put other things on the cabinet.
USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
-Do not drop or bump the projector, otherwise damages or malfunctions may result.
-When carrying the projector, use a suitable carrying case.
-Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, consult your dealer for their information.
-Do not put the projector in a case before the projector is cooled enough.
