Sanyo DVC-2500 manual Operation with tape Tape Counter Memory Feature, Additional Information

Press CLK/CNT repeatedly to display the real- time counter appears on the TV screen.

At the point that you want locate later, reset the real-time counter to “M 0:00:00” by pressing

CLEAR.

Operation with tape (Continued)

Tape Counter Memory Feature

Real-Time Counter

Shows length of tape run in hours, minutes, and sec- onds. Press CLK/CNT to select the real-time counter display.

Every press of CLK/CNT changes the TV screen as illustrated below.

2:15 AM	M 0:05:25	REM 1:07
CLOCK	COUNTER	REMAINING TIME

Counter changes to “M 0:00:00” when the cassette is ejected.

The real-time counter does not operate if nothing is record- ed on the tape.

The real-time counter will not work unless a tape is inserted.

Counter Memory Function

This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.

1Begin recording or playing a tape.

2

3

4Continue to play or record.

5 Press STOP (x) when recording or playback fin- ishes.

6The tape automatically stops when the tape counter returns to about “M 0:00:00”.Press BACKWARD (.).

Tape Remaining

This function allows the time of the remaining tape to be displayed during recording or playback.

Press CLK/CNT until the REM indicator displays on the TV screen during recording or playback.

Note

The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc)

Additional Information

In manual recording, Timer recording, Instant Timer
Recording, playback, or fast forward modes, the DVD+VCR
automatically starts rewinding the tape at the end of the	OPERATION
be ready to play or record the next time you use it.
tape. The cassette will stop at the beginning of the tape and

be ejected, and the DVD+VCR will turn itself off.

After you have finished using the DVD+VCR, rewind, eject, and remove the cassette. Place the cassette in its protec- tive sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it will

Be sure the DVD+VCR Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by setting the television on the DVD+VCR channel (3 or 4) and pressing the TV/VCR selector to turn the DVD+VCR’s VCR indicator on.

Do not attempt to hook up more than one television set to the DVD+VCR for either recording or playback.

Auto Play System

This DVD+VCR features automatic playback. Load a cassette (with the safety tab removed).

The power turns on automatically and playback begins. At the end of the tape, the DVD+VCR stops, then rewinds.

The cassette is ejected after rewinding and turn itself off automatically.

LOAD		AUTO
AUTO	AUTO	AUTO
		POWER
PLAY	REWIND
		OFF
TAPE
		EJECT

27