DVD-DX405(K501)CA(GB) 2006.6.191:24PM ˘ ` 37

OTHERS

TROUBLESHOOTING

If you experience the following problems while using the unit, this troubleshooting guide can help you.

NO SOUND

-Check if the unit is connected securely.

-Make sure you operate the TV or amplifier correctly.

NO IMAGE , IMAGE ROLLS AND NO COLOR

-Check if the unit is connected securely.

-Make sure you operate the TV correctly.

-Make sure you set the color system correctly.

DISC CAN NOT BE PLAYED

-There is no disc in the unit.

-Insert the disc on the disc tray properly with the label side up.

-Clean the disc.

-Moisture has condensed in the unit.

Remove the disc and leave the unit on for about one hour.

REMOTE CONTROL DOES NOT WORK

-Remove barriers between the remote control and the unit.

-Replace the batteries with new ones.

-Point the remote control at the remote control sensor of the unit.

ATTENTION: KEEPING THE STATUS OF STOP MORE THAN 5 MINUTES ENTERS SCREEN SAVE MODE. WHEN THE SCREEN SAVE MODE IS KEPT MORE THAN AN HOUR, THE SET ENTERS STAND-BY MODE.

37

Page 38
Image 38
Sanyo DVD-DX405 instruction manual Others, Troubleshooting