Quick Installation Guide
Smart Wireless THUM Adapter
Troubleshooting
If the device is not operating properly, refer to the troubleshooting section of the manual. The most common cause of incorrect operation is the Network ID and Join Key. The Network ID and Join Key in the device must match that of the Smart Wireless Gateway.
The Network ID and Join Key may be obtained from the Smart Wireless Gateway on the Setup>Network>Settings page on the web server. The Network ID and Join Key may be changed in the wireless device by using the following Fast Key sequence.
|
|
|
Function | Key Sequence | Menu Items |
Wireless Setup | 1, 4 | Smart Power, Network ID, Set Join |
|
| Key, Radio State |
REFERENCE INFORMATION
NOTE:
In order to communicate with a Field Communicator, the wired device must be powered.
Table 1. THUM Adapter Fast Key Sequence |
| |
Function | Key Sequence | Menu Items |
Device Info | 2, 2, 4, 3 | Manufacturer, Model, Final Assembly Number, Universal, |
|
| Field Device, Software, Hardware, Descriptor, Message, |
|
| Date, Model Number I, II, III, SI Unit Restriction, Country |
Guided Setup | 2, 1 | Configure, Guided Setup, Join Device to Network, |
|
| Configure Update Rate, Zero Trim, Configure Device |
|
| Display, Configure Process Alarms |
Manual Setup | 2, 2 | Configure, Manual Setup, Wireless, Pressure, Device |
|
| Temperatures, Device Information, Display, Other |
Wireless | 2, 2, 1 | Network ID, Join Device to Network, Configure Update |
|
| Rate, Configure Broadcast Power Level, Power Mode, |
|
| Power Source |
20
