Sanyo DVD-SL25 instruction manual Connecting to an Audio System and TV Example

ADDITIONAL CONNECTION EXAMPLES

Connecting to an Audio System and TV (Example 3)

Connect the DVD video player to an Audio System and a TV.				DVD video player
		COMPONENT VIDEO OUT
	Y	PB	PR
	VIDEO OUT
	SELECT
	S
S-VIDEO OUT	R	L		OPT.
	COMPONENT	AUDIO OUT	VIDEO OUT	DIGITAL
				OUT

To AC 120V, 60Hz	R
	(Red)

To AUDIO OUT jacks

(White) L

To VIDEO OUT jack		TV with Audio/Video input jacks
(Yellow)
	To video input (Yellow)
*Video cable		AUDIO R-AUDIO-L VIDEO
(not supplied)
		VIDEO
		INPUT
		1

Notes:

•	Please refer to the instruction manual of
	your Audio System and TV.
•	When you connect the DVD video player
	to other equipment, be sure to turn off the

*Audio cable (not supplied)

Audio System

To audio input jacks

(White) L L

power and disconnect all of the equipment

from the wall outlet until all the

connections have been made.

• Do not connect the DVD video player to a

VCR directly. The playback picture will

be distorted because DVD video discs

R

(Red) R

AUDIO INPUT

are copy protected.

*Please consult your local audio/video dealer.

Using the COMPONENT VIDEO OUT jacks Note:

Please follow the steps before turn on the power.

Using the S-VIDEO jack

Note:

Please follow the steps before turn on the power.

1.If your TV has the S-video input jack, connect the DVD video player with the S-video cable (not supplied). (The VIDEO OUT jack connection is not necessary.)

You can enjoy clearer picture playback.

2.Set the VIDEO OUT SELECT switch to the S position.

3.You also need to connect the left and right audio cables (not supplied) to the AUDIO OUT jacks of DVD video player and the Audio input jacks of the Audio System.

DVD video player		TV
	Y
VIDEO OUT
SELECT
S		S-VIDEO IN 1
	R
S-VIDEO OUT
COMPONENT
To S-VIDEO
OUT jack		To S-video input jack
		*S-video cable
		(not supplied)

*Please consult your local audio/video dealer.

1.If your TV has the component video input jacks, connect the DVD video player to these jacks. (The VIDEO OUT or S- VIDEO OUT jack connection is not necessary.)

You can enjoy high quality picture playback.

2.Set the VIDEO OUT SELECT switch to the COMPONENT position.

3.You also need to connect the left and right audio cables (not

supplied) to the AUDIO OUT jacks of DVD video player and the Audio input jacks of the Audio System.

4. Set the DVD video player toTV the INTERLACE position.

See page E13.

		COMPONENT VIDEO OUT
	Y	PB	PR
	VIDEO OUT
	SELECT
	S
S-VIDEO OUT	R	L		COMPONENT VIDEO INPUT
	COMPONENT
		AUDIO OUT	VIDEO OUT	Y	PB	PR
	Green	Blue	Red	Green	Blue	Red

*Component video cable (not supplied)

-E9-