Sanyo DVD-SL25 instruction manual Connecting to a Digital Amplifier Example

Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder

Notes:

•For VIDEO connection, please refer to “BASIC CONNECTIONS”.

•Please refer to the instruction manual of your amplifier.

•When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made.

Connecting to an Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder (Example 4)

To digital audio input

*Optical cable (not supplied)

	To DIGITAL OUT jack
		COMPONENT VIDEO OUT
	Y	PB	PR
	VIDEO OUT
	SELECT
	S
S-VIDEO OUT	R	L		OPT.
	COMPONENT	AUDIO OUT	VIDEO OUT	DIGITAL
				OUT

Before connecting, remove the protective cap from the jack. Replace the cover when the jack is not in use.

Front left

speaker

Surround left

speaker

Center speaker

Front right

speaker

Subwoofer

Surround right

speaker

*Please consult your local audio/video dealer.

To enjoy Dolby Digital sound

Select “Dolby Digital BitStream” in “Setting Digital Out” on the INITIAL SETTINGS. (See page E29.)

To enjoy DTS sound

Select “DTS On” in “Setting Digital Out” on the INITIAL SETTINGS. (See page E29.)

To enjoy MPEG2 sound

Select “MPEG BitStream” in “Setting Digital Out” on the INITIAL SETTINGS. (See page E29.)

Connecting to a Digital Amplifier (Example 5)

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

You can enjoy 2 Channel Digital Stereo Sound.					Amplifier with an optical digital input
					To digital audio input
Before	connecting,		*Optical		cable
			(not supplied)
remove the protective cap
from the jack. Replace the
cover when the jack is not		To DIGITAL OUT jack
in use.
			COMPONENT VIDEO OUT		Front left	Front right
		Y	PB	PR	speaker	speaker
		VIDEO OUT
		SELECT
		S
	S-VIDEO OUT	R	L		OPT.
		COMPONENT	AUDIO OUT	VIDEO OUT	DIGITAL
					OUT

To enjoy 2 Channel Digital Stereo sound

Select “Dolby Digital LPCM”, “MPEG LPCM”, and “DTS Off” in “Setting Digital Out” on the INITIAL SETTINGS. (See page E29.) Note:

If “DTS On” is selected, loud noise will occur. (See page E29.)

*Please consult your local audio/video dealer.

-E10-