Sanyo DVD-SX25 manual Language Setup

LANGUAGE SETUP

OSD LANG: You can select the default OSD language of the player menus.

AUDIO: You can select the default audio language if supported by that DVD disc.

DISC MENU: You can select the DVD’s disc menu language among these languages. Disc menu appears in the selected language, if supported by that DVD disc.

SUBTITLE:

You can select the default subtitle language if supported by that DVD disc.

PREFERENCES

ANGLE MARK: This option allows you to turn on/off the angle mark on the screen, which is displayed to indicate that a multi angle scene has started. It also shows which angle you are currently watching.

STANDBY TIME: Standby activation time can be adjusted or standby can be disabled using this option. If one of the time options is selected, standby is activated, whenever no key is pressed for the selected time duration in stop mode.

DEFAULT: If you choose RESET and press SELECT, the factory-presets are loaded. After factory reset, password and parental level does not change.

DOWNMIX: This mode allows the DVD player analog audio outputs to be matched to the features available on the TV in use. Analog audio outputs can be selected as:

SURROUND: Surround sound output.

STEREO: Two channels stereo. Use this option if you have a stereo TV or a stereo HI-FI system.

NOTE: It is not possible to connect speakers directly to this DVD player; an AV amplifier must be used.

PARENTAL (Parental Level):

Playing some DVDs can be limited depending on the age of users. The “Parental Control” function allows playback limitation level to be set by the parent.

Parental Level can be adjusted to one of the eight levels. Level “8 ADULT” adjustment let you watch all of the DVD titles ignoring the DVD disc’s parental level. You can watch the DVD discs, which has the same or lower parental level than the player’s level only.

PASSWORD (Change Password):

Using this item you can change the current password.

To change the password you will be prompted to enter your old password. After you have entered your old password, you can now enter the new 4- digit password, two times

You can use C key to delete the incorrect entry.

Note: Factory preset of the password is “0000”.You have to enter XXXX digital password every time you want to change the parental level. If you forget your password please contact technical service.

- 31 -