BASS CONTROL....................................................... | 3 |
Press the SOUND button for more than 1.5 second to switch ON/OFF of the BASS mode. When the BASS mode is on, “BASS” is displayed and the bass enhances.
RADIO SELECTION BUTTON (BAND) ......................... | 4 |
Press the BAND button to switch from CD player, CD changer or tape mode to radio.
Each time the button is pressed, the function changes as shown below. |
| |
FMI FMII | FMIII AM |
|
TAPE, CD PLAYER OR CD CHANGER* SELECTION |
| |
BUTTON | 5 | |
Press the CD/TAPE/
Pressing the button will change the mode as follows.
Radio 
CD player 
CD changer 
TAPE
Notes
•When a CD is not loaded in the CD player, the CD player mode is skipped.
•When a cassette is not loaded in the cassette player, the TAPE mode is skipped.
•When a CD changer is not connected, the CD changer mode is skipped.
CLOCK BUTTON (DISP) ............................................ | 6 |
Press the DISP button to switch between the clock and audio display. When an audio function is performed while the time display is selected, the audio display will appear for 5 seconds, then the display will return to the time mode.
TO CANCEL THE BEEP TONES ................................. | 1, 7 |
1Turn off the power by depressing the POWER button .
2To cancel all beep tones, press the POWER button and the ATP button simultaneously for more than 3 seconds and then "bP : OF" is displayed.
3To turn on the beep tones again, perform the same procedure. The beep tones are set and "bP : on" is displayed.