ERROR SIGNS

CD Player

If a problem should occur while operating the built-in CD player, one of the following error signs may be displayed:

Symptom

Cause

Solution

 

 

 

 

 

Press the eject button.

E01

Abnormal CD mechanism function.

Turn the power off and then on

again. If it is not corrected, contact

 

 

 

 

the place of purchase.

 

 

 

 

The disc was inserted incorrectly.

Insert the disc properly.

 

 

 

 

The disc is dirty.

Clean the disc.

E07

 

 

The disc is defective.

Use another disc.

 

 

 

 

There is condensation on the opti-

Leave the disc player off for an hour

 

cal lens.

or so, then try again.

 

 

 

 

 

Turn the power off and then on

E99

Internal connection check error.

again.

If it is not corrected, contact the

 

 

 

 

place of purchase.

 

 

 

CD Changer

If a problem should occur while operating the connected CD changer, one of the following error signs may be displayed.

Symptom

Cause

Solution

 

 

 

E01

Abnormal mechanism function

Contact the place of purchase.

 

 

 

 

The disc was inserted incorrectly.

Insert the disc properly.

 

 

 

 

The disc is dirty.

Clean the disc.

 

 

 

 

The disc is defective.

Use another disc.

E07

 

 

There is condensation on the

Leave the disc player off for an hour

 

optical lens.

or so, then try again.

 

 

 

 

 

Refer to the instructions supplied

 

 

with the CD changer.

 

 

 

 

The magazine is not fully inserted

Completely insert the magazine into

no Cd

into the changer.

the changer until it clicks into place.

 

No discs in the magazine.

Load discs into the magazine.

 

 

 

-19-